MANUAL | QUICK START GUIDE

CORSAIR XENEON FLEX 45WQHD240 OLED 45-INCH GAMING MONITOR

Xeneon Flex Web QSG - Front Monitor
XENEON FLEX QSG 45WQHD240-OLED HEX CERT GRAPHICS

簡介

產品設定、使用者資訊和保固/壞點政策請見 https://qsg.corsair.com/xeneon-monitors

注意事項

  • 僅使用螢幕隨附或製造商建議使用的配件。
  • 將產品的塑膠包裝袋存放在兒童無法觸及的地方。
  • 將螢幕連接至電源插座之前，確認電源線的額定電壓與您所在國家的電力規格相容。
  • 電源線插頭必須正確連接至有線的接地電源插座。
  • 請勿以濕的雙手觸碰插頭，否則很容易造成觸電。
  • 將螢幕置於穩定且通風良好的地方。
  • 請勿將螢幕置於任何熱源附近，例如電散熱器或陽光直射處。
  • 螢幕上的孔洞或開口用於通風。請勿以任何物品覆蓋或阻擋通風孔。
  • 請勿在水、飲料或任何液體類型附近使用螢幕。若無法這麼做，可能會造成觸電或損壞螢幕。
  • 清潔之前，務必從電源插座拔下螢幕插頭。
  • 由於螢幕表面很容易刮傷，請避免以任何堅硬或尖銳的物品觸碰表面。使用不含棉絨的柔軟布料擦拭螢幕，不要使用面紙。如有需要，您可以使用玻璃清潔劑清潔設備。不過，請勿將清潔劑直接噴灑在螢幕上。
  • 若設備長時間沒有在使用，請拔除電源線。
  • 請勿嘗試自行拆解或維修螢幕。
  • 使用前請撕下產品背面的保護膜。
  • 產品運作中或關閉時，請勿拔除電源。
    • 若不慎拔除電源，則可能會不時出現水平線段雜訊。
    • 若出現水平線段雜訊，請執行「影像保留重新整理」。
      (OSD/系統設定/影像保留重新整理)

包裝內容

Corsair Xeneon Flex QSG - Packaging Content

CORSAIR XENEON FLEX 45WQHD240 OLED 螢幕內容

A. CORSAIR XENEON FLEX 45WQHD240 OLED 顯示面板
B. 支架底座
C. 交流電轉接器
D. 交流電源線
E. DisplayPort 纜線 (1.5 公尺)
F. HDMI 纜線 (1.5 公尺)
G. USB-C 纜線 (1.5 公尺)
H. USB-A 轉 USB-C 纜線 (1.8 公尺)

組裝

Xeneon Flex Web QSG Section 4 Unpacking Instruction
  1. 去除頂端的膠帶，打開箱子。
  2. 將螢幕底座支架配件取出。
  3. 將頂端的 EPS 墊層和保護用的 EPS 板取出。
  4. 將 4 個卡扣和外箱去除。
  5. 緩慢地從包裝中取出螢幕。
  6. 鎖緊螺絲以連接頸枕和螢幕底座。水平放置螢幕並完成組裝。

彎曲與傾斜

XENEON_FLEX Side Handle 2
按下把手上的按鈕，以鬆開並拉出把手。再次按下按鈕以放回把手。

此 CORSAIR XENEON FLEX 45WQHD240 OLED 螢幕可利用兩端的側邊把手，彎曲至平坦與 800R 曲率之間的程度。側邊把手可以延伸，作法是按下把手上的按鈕之後將把手拉出，直至發出卡嗒聲鎖入定位為止。

兩手各抓握一邊把手，同時避免拇指或手碰觸 OLED 面板。

以緩慢、流暢的動作將面板朝您彎曲。彎曲機件會在達到完全彎曲的程度 (~800R) 以及彎回到平坦狀態時發出卡嗒聲。

CORSAIR XENEON FLEX 45WQHD240 OLED 螢幕的特點是堅固且時尚的支架，可進行傾斜式的調整。可利用正面底部中央的把手傾斜面板。視您的桌面而定，在傾斜的過程中，對底座或一邊的側邊把手施加壓力，可能有避免螢幕滑動的作用。

  • 傾斜 -7 / + 15 度
Xeneon Flex Web QSG Tilt -7 View Xeneon Flex Web QSG Tilt +15 View

連接能力

正面

Xeneon Flex Web QSG Section 5 Front Side
  1. USB 3.1 Type-A – 雙 Type-A 5Gbps USB 3.1 Gen1 連接埠
  2. 3.5mm 音訊插孔：音訊輸出耳機接頭
  3. 輸入來源選擇 – 依以下循環順序從目前的輸入依序切換：HDMI1、HDMI2、DP、Type-C DP Alt 模式
  4. 電源開啟/關閉 (ON/OFF) – CORSAIR Xeneon Flex 45WQHD240 OLED 的電源開啟/關閉 (ON/OFF)。選擇其他輸入端時，會重新啟動 LED。關閉電源、「影像保留重新整理」執行中時，LED 會交替亮白色與琥珀色 (約 4-5 分鐘)。
  5. OSD 搖桿 – 選擇 OSD 項目之用的 5 向搖桿控制器。按下中央處：叫出螢幕上顯示。

背面

  1. HDMI 2.1 – 雙 HDMI 輸入對應至「HDMI1」和「HDMI2」輸入
  2. DisplayPort 1.4 – DisplayPort 輸入對應至「DisplayPort」輸入
  3. USB Type-C Alt DP – 支援 DisplayPort Alt 模式和上游 USB 輸入 (連接至 USB 3.0 連接埠)。對應至「TYPE C」輸入。此連接埠或 USB 上游連接埠必須連接至主機裝置上具有 USB 功能的連接埠，才能支援下游 USB 3.0 連接埠。
  4. USB 3.1 Type-A – 雙 Type-A 5Gbps USB 3.1 Gen1 連接埠
  5. USB Type-C IN – 上游 USB 輸入連接埠。此連接埠或 USB Type-C 連接埠必須連接至主機裝置上具有 USB 功能的連接埠，才能支援下游 USB 3.0 連接埠。
  6. DC 輸入 – 連接至隨附的交流電轉接器
Xeneon Flex Web QSG Section 5 Back View

操作

控制

Xeneon Flex Web QSG Section 7 Controls Panel

此螢幕的正面附有搖桿，可開啟捷徑和導覽顯示器設定。

螢幕上顯示 (OSD)

向內按下搖桿後，可以存取螢幕的顯示器設定。您可以使用搖桿導覽設定，而向內按下搖桿將會確認選項。

OSD – 圖片

標籤為「圖片」的第一個功能表包含下列用於調整整體圖片品質的設定。

Xeneon Flex Web QSG Section 6 Picture - Setting
Xeneon Flex Web QSG Section 6 Picture Setting 2
Xeneon Flex Web QSG Section 6 Picture - Setting Xeneon Flex Web QSG Section 6 Picture Setting 2
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 OSD BEHAVIOR
Picture Present Standard   Selects a display preset factory calibrated for general use and best power savings
Movie Selects a display preset optimized for watching movies
Text Selects a display preset optimized for reading text
sRGB Selects a display preset optimized for HDR content in sRGB color space
Creative Selects a display preset factory calibrated for content-creation tasks
Game Selects a display preset optimized for playing fast-moving games
HDR Shows HDR when HDR-mode is selected in the Operating System Display Settings
Brightness (0-100)   Adjusts the intensity of the display backlight
Contrast (0-100)   Adjusts the display’s contrast
Sharpness (0-10)   Adjusts the display’s sharpening filter, increasing edge detail
Color Temperature

Default

   Sets the display’s color temperature to default, 8500K
Standard Sets the display’s color temperature to standard, 6500K
Warm Sets the display’s color temperature to warm, 5000K
Custom R (0-100) Allows you to manually set the display’s color temperature with sliders controlling the red, blue, and green levels
G (0-100)
B (0-100)
Gamma 2   Adjusts the perceived luminance; default is 2.2
2.2
2.4
Saturation (0-10)   Adjusts the saturation level; default is 0
Refresh Overlay OFF   Toggles an overlay in the top right corner which displays the monitor’s current refresh rate, useful for tracking frames per second when Adaptive Sync is enabled
ON
Crosshair OFF   Enable Crosshair function
Dot
Cross
Angle
Crosshair Color Green   Change Crosshair Color
Red

OSD – PIP/PBP (子母畫面 / 並排畫面)

標示為「PIP/PBP」的第二個功能表可供您啟用 PIP/PBP 功能，以不同的方式顯示。

Xeneon Flex Web QSG Section 6 PIP-PBP Setting
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 OSD BEHAVIOR
PIP/PBP Function Mode OFF   Enable PIP or PBP function
PIP
PBP
PIP Position Top Left   Place sub input source at top left side
Top Right Place sub input source at top right side
Bottom Left Place sub input source at bottom left side
Bottom Right Place sub input source at bottom right side
Sub Input Source HDMI 1   Select sub input source
HDMI 2
Display Port
Type C
Swap Video Source     Swaps video source between main picture and sub picture
Switch Audio Source Main Source   Change audio source between main source and sub source
Sub Source

OSD – OSD 設定

標示為「OSD 設定」的第三個功能表包含下列用於調整顯示器內部設定的設定。

Xeneon Flex Web QSG Section 6 OSD Setting
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 OSD BEHAVIOR
OSD Setting Language 繁體中文   Selects the OSD’s language
English
Français
Deutsch
Italiano
日本语
한국어
Português
Español
Transparency OFF   Sets the OSD to be transparent or opaque
ON
Time Out (10-60)   Adjusts how long (in seconds) the OSD stays on screen before disappearing

OSD – 系統設定

標示為「系統設定」的第四個功能表可供您調整系統設定。

Xeneon Flex Web QSG Section 6 System Settings
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 FUNCTIONALITY
System Setting Aspect Ratio Auto  

Aspect ratio is the ratio of width to height of an image or screen. When the aspect ratio is set to Auto, the monitor will adapt the aspect ratio to match the incoming video signal. This mode is useful when trying to view an image with a different aspect ratio than the display without distorting the image. Full mode will take the input and change the size of the image to fit the screen. 

Full
Adaptive Sync OFF  

Enables AMD FreeSync or NVIDIA G-SYNC to reduce screen tearing and stuttering by synchronizing the monitor’s refresh rate with the framerate from the GPU. When enabled, you will be able to select AMD FreeSync or NVIDIA G-SYNC within the Graphics Driver.

NVIDIA G-Sync compatibility is available when connected via DP cable or USB Type-C Alt Mode cable to compatible GPU.

For NVIDIA G-Sync functionality:

• Install/open NVIDIA Control Panel
• Select "Set up G-SYNC"
• Select "Enable G-SYNC Compatible" checkbox
• Select the display "45WQHD240"
• Select "Enable settings for the selected display model"
• Click the "Apply" button

May require a system reboot to access NVIDIA settings.
ON
Image Retention Refresh Start Refresh  

Refreshes the pixels to prevent image retention or “burn-in”.   If the display is left on for 8 hours, an overlay notification will appear on the screen suggesting that Image Retention Refresh be performed. While the display is being refreshed, the monitor cannot be used. When the monitor is powered off, Image Retention Refresh will be running automatically if it has been operated for more than 8 hours. Hitting the power button during a refresh will cancel the process and will allow the display to be used. To ensure the monitor’s longevity, it is recommended to power the monitor off when not in use and utilize the Image Retention Refresh during long periods of continued use.
Orbit OFF  

While activated, the image shifts 1 pixel per minute in a circular pattern to prevent screen damage and image retention. To ensure monitor longevity, it’s recommended to always keep the Orbit setting on, especially when using the monitor for productivity and work uses or still images.

ON
Brightness Stabilizer OFF  

Limits the peak brightness of the monitor to 200 nits while providing more stable brightness levels when switching between windows and applications. To take advantage of the full brightness and contrast capabilities provided by this monitor set Brightness Stabilizer to OFF; ideal for HDR, gaming and media consumption. To ensure stable brightness settings for productivity tasks, set Brightness Stabilizer to ON.
ON
Source Detection Auto  

Allows the user to choose whether the monitor should automatically detect a video source or allows the user to manually select the video source. Auto should be selected when there is only one video input device, and Manual should be selected when a specific video input is desired, but there are multiple video inputs.
Manual
USB-C Alt Mode 4 Lane  

Allows the user to choose between USB data transfer speeds but can affect the refresh rate of the monitor.

 

• 4-Lane Mode allows up to 3440 x 1440 @ 240Hz resolution but reduces the speed of the USB Type-A ports to USB 2.0
• 2-Lane Mode allows for up to 3440 x 1440 @ 60Hz but enables USB Type-A at USB 3.0 speed

 

To take full advantage of high refresh rates please set USB-C Alt Mode to 4-lane; ideal for gaming. To take advantage of faster USB data transfer speeds please set USB-C Alt Mode to 2-lane; ideal for productivity tasks and data transfers.
2 Lane
Factory Reset OFF  

When applied, Factory Reset returns the monitor to its default factory settings. All settings previously applied will be reset to the default settings.

OSD – 音訊

標示為「音訊」的第五個功能表可供您控制顯示器的音量。音訊會從目前使用中的「音訊輸入」訊號所傳遞。

Xeneon Flex Web QSG Section 6 OSD - Audio
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 OSD BEHAVIOR
Audio Volume (0-100)   Adjusts the volume of the audio output from the headphone jack

OSD – 輸入來源

標示為「輸入來源」的第六個功能表可供您在顯示器的不同輸入之間切換。

Xeneon Flex Web QSG Section 6 OSD Input Source
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 OSD BEHAVIOR
Input Source HDMI 1     Switches to the device connected to the HDMI-1 port
HDMI 2 Switches to the device connected to the HDMI-2 port
DisplayPort Switches to the device connected to the “DP” DisplayPort port
Type C Switches to the device connected to the TYPE-C port

OSD – 資訊

標籤為「資訊」的第七個功能表，提供關於顯示器的系統資訊。

Corsair Xeneon Flex Web QSG OSD - Information Setting
LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 OSD BEHAVIOR
Information Source     Display the current input source
Resolution   Display the current display resolution
Refresh Overlay   Display the current refresh rate
Adaptive Sync   Adaptive Sync Status
HDR   HDR status
FW Version   Shows the current FW Version

附錄

表 1：技術規格

Product Name
CORSAIR XENEON FLEX 45WQHD240 OLED
Part Number CM-9030001
Device RDD0022
USB Hub ID CORSAIR USB 3.1 Hub 
Panel Size 45” Diagonal
Display Surface Non-Glare
Pixels per inch 83
Aspect Ratio 21:9
Native Resolution 3440 x 1440 @ 240Hz
Response Time (GtG) 0.03ms
Display Colors 1.07B colors (10bit RGB)
Panel Technology OLED
Flicker-Free Yes
Viewing Angles 178° (H) / 178° (V)
Peak Brightness

25% APL: 450cd/m2
100% APL: 150cd/m2
Static Contrast Ratio 1,500,000:1
HDR HDR with 1000 nit peak brightness
Color Gamut (CIE 1976) 98.5% (DCI-P3), 100% (sRGB)
Variable Refresh Rate

NVIDIA G-Sync compatible certified
AMD FreeSync Certified
HDMI Input 2x HDMI 2.1
DisplayPort Input 1x DisplayPort 1.4
USB-C Input 1x DisplayPort 1.4 (USB-C Alt Mode), 30W Power Delivery, USB 5Gbps Data Upstream
USB-C Upstream Input 1x 5Gbps USB-C with Max 15W Power Delivery
USB-A Output 4x 5Gbps Type-A USB Type-A 3.1 gen1
3.5mm Audio Yes, passthrough from video input
Power Consumption (On) 60.27 W
Power Consumption (Sleep) <0.5W
Power Consumption (Off) <0.3W
VESA Compatibility N/A
Dimensions (W x H x D), Flat Mode 1,065.6mm x 574.9mm x 304.6mm
Dimensions (W x H x D), Curved Mode 994.3mm x 574.9mm x 353.7mm
Weight 15.5kg
Stand Tilt -7/+15 degrees
AC Adapter 240W
  Note: your device uses the following power supply: Delta ELECTRONICS. Inc. / ADP-240EB D

表 2：支援的顯示模式

Resolution Refresh Rate HDMI DP/Type-C PIP/PBP (HDMI) PIP/PBP (DP/Type-C)
640x480 VGA 60Hz V V V V
67Hz V V V V
72Hz     V  
75Hz     V  
720x400 Dos-Mode 70Hz V V V V
800x600 SVGA 56Hz V V V V
60Hz V V V V
72Hz V V V V
75Hz V V V V
832x624 MAC 75Hz V   V  
1024x768 XGA 60Hz V V V  
70Hz     V  
75Hz V V V V
1152x864 VESA 75Hz V V V V
1152x870 XGA+ 75Hz V V V V
1280x720 WXGA 60Hz V V V V
1280x800 WXGA 60Hz V V V  
1280x960 WXGA 60Hz V V V V
1280x1024 SXGA 60Hz V V V V
75Hz V V V V
1440x900 WXGA+ 60Hz V V V V
1680x1050 WSXGA+ 60Hz V V V V
1920x1080 FHD 60Hz V V V V
240Hz V V    
2560x1440 QHD 60Hz     V V
120Hz V V    
240Hz V V    
3440x1440 WQHD 50Hz V V    
60Hz V V V V
100Hz V V    
240Hz V V    
480P 640x480p @ 60 Hz 4:3 V V    
720x480p @ 60 Hz 16:9 V V    
480i 720x480i @ 60Hz 16:9     V V
576P 720x576p @ 50 Hz 16:9 V V    
720P 1280x720p @ 50 Hz 16:9 V V V V
1280x720p @ 60 Hz 16:9 V V V V
1280x720p @ 120 Hz 16:9 V V    
1080P 1920x1080p @ 24 Hz 16:9   V V V
1920x1080p @ 30 Hz 16:9   V V V
1920x1080p @ 50 Hz 16:9   V V V
1920x1080p @ 60 Hz 16:9 V V V V
1920x1080p @ 100 Hz 16:9 V V    
1920x1080p @ 120 Hz 16:9 V V    
1080i 1920x1080i @ 50 Hz 16:9 V V V V
1920x1080i @ 60 Hz 16:9 V V V V
2160P 3840x2160p @ 24 Hz 16:9 V   V V
3840x2160p @ 25 Hz 16:9 V   V V
3840x2160p @ 30 Hz 16:9 V   V V
3840x2160p @ 50 Hz 16:9 V   V V
3840x2160p @ 60 Hz 16:9 V   V V
3840x2160p @ 100 Hz 16:9 V      
3840x2160p @ 120 Hz 16:9 V      

關於低藍光與無閃爍

  • 此螢幕應與您的眼睛距離 50 ~ 70 公分 (20 ~ 28 吋)。
  • 長時間看著螢幕會使眼睛疲勞，可能會影響視力。
  • 本產品每使用 1 小時，請讓眼睛休息 5 ~ 10 分鐘。
  • 將視線聚焦於遠方的物體，能減輕眼睛的壓力。
  • 經常眨眼和做眼部保健操，有助於防止眼睛乾澀。

** 本螢幕採用低藍光面板，在原廠重設/預設設定模式之下符合驗證機構 TÜV Rheinland 的 Low Blue Light Hardware Solution (低藍光硬體認證，例如：亮度 75%，對比度：50%，CCT：標準，預設模式：標準。)

HDMI 法律披露

HDMI、HDMI High-Definition Multimedia Interface等詞彙、HDMI 商業外觀及 HDMI 標識均為 HDMI Licensing Administrator, Inc. 的商標或註冊商標。

Xeneon Flex Web QSG HDMI Logo