快速入門指南

CORSAIR iCUE LINK RX RGB

PWM FANS

RX_RGB_Fans_Main_Visual
CORSAIR_iCUE_LINK_Color_Logo_max-1000x400_Uncropped

CONTENTS

Expansion Fan

RX_Expansion_Kit
  • One (1) fan
  • Two (2) connectors
  • Four (4) QuikTurn mounting screws

120mm Starter Kit

RX_120mm_Kit
  • Three (3) fans
  • iCUE LINK System Hub
  • Two (2) iCUE LINK cables
  • One (1) power cable
  • One (1) Micro-USB cable
  • Four (4) connectors
  • Twelve (12) QuikTurn mounting screws

140mm Starter Kit

RX_140mm_Kit
  • Two (2) fans
  • iCUE LINK System Hub
  • Two (2) iCUE LINK cables
  • One (1) power cable
  • One (1) Micro-USB cable
  • Two (2) connectors
  • Eight (8) QuikTurn mounting screws

GETTING TO KNOW YOUR RX RGB

RX_Getting_to_Know
  1. iCUE LINK RX RGB fan
  2. iCUE LINK System Hub
  3. QuikTurn mounting screws
  4. Active bridge connector
  5. Passive connector
  6. iCUE LINK cable
  7. Micro-USB cable
  8. Power cable
  9. Active port
  10. Passive port

GETTING TO KNOW YOUR RX RGB

The pre-installed decorative plate on RX RGB is detachable. The fan can be used with or without the decorative plate depending on your preference.

RX_Fans_DetachablePlate

GETTING TO KNOW YOUR SYSTEM HUB

Getting_To_Know_System_Hub.max-800x600

I. Active port
K. Power input
L. USB input
M. Tach output

FAN INSTALLATION

BEFORE YOU START

Alert_Orange_925SUrT.max-800x600
To ensure proper operation, keep the active ports free of any foreign objects/materials. Please use the RX RGB and accessories as defined in this document.
Alert_Orange_925SUrT.max-800x600
Turn the computer off prior to the installation of the RX RGB and accessories.

STARTER KIT

This section will provide a brief guide on how to install your RX RGB Starter Kit.

RX_Setup1
RX_Setup2

Create or add into a Fan Group


Connect the RX RGB fan into an existing fan group by aligning and inserting the connectors into the open active (I) and passive ports (J).

Set up the RX RGB fan group


After connecting your RX RGB fans together, insert the iCUE LINK cable (F) into an open active port (I) on your RX RGB fan.


RX_Setup3
QX140_RGB_RENDER_31_Ehmihbs.max-800x600

Install RX RGB inside the case


Mount the RX RGB fans onto your case with the supplied QuikTurn mounting screws (C).

Please note that QuikTurn screws thread much faster than traditional self-tapping screws; we advise hand tightening QuikTurn screws with a screwdriver only to avoid over threading your RX RGB fans.

Connect fan to iCUE LINK System Hub


Connect the power cable (H), Micro-USB cable (G), and iCUE LINK cable (F) into the System Hub (B), then connect the power cable (H) and Micro-USB cable (G) into your power supply and motherboard, respectively.


Sys_Hub_Connection
Blank_frame.max-800x600

Mount iCUE LINK System Hub to your case


The iCUE LINK System Hub (B) can be magnetically mounted on a steel chassis or adhered to a surface with the supplied mounting tape.


EXPANSION FAN

This section will provide a brief guide on how to install your RX RGB Expansion Fan.

RX_Setup1
RX_Setup2

Create or add into an existing fan group


Connect the RX RGB Expansion fan into an existing fan group by aligning and inserting the connectors into the open active (I) and passive ports (J).

Connect RX RGB to an iCUE LINK System Hub


Insert the iCUE LINK cable (F) into an open active port (I) on your RX RGB fan.


QX140_RGB_RENDER_32_iATU8s4.max-800x600
Blank_frame.max-800x600

Connect fan to iCUE LINK System Hub

Connect the iCUE LINK Cable (F) into an available active port (I) on the iCUE LINK System Hub (B - sold separately).


SOFTWARE SETUP

1. Install iCUE

Learn more and download the latest CORSAIR iCUE software

CORSAIR_iCUE_Color_Logo_mspGYp3.max-800x600_Cropped

2. Update iCUE

  • Once iCUE is installed, run the software. If a newer iCUE version is available or if any of the connected devices need a firmware update, you will be prompted to perform an update via a notification in the top right corner. You can also click the settings (cog wheel icon in the top right corner) and check for the software and firmware updates manually.
RX_Fans_iCUE_Update

3. Quick Lighting Setup

  • Select the predefined Murals effects from the iCUE Home screen to quickly change the lighting effects.
RX_Fans_iCUE_Murals

4. Configure iCUE - Fan Setup

The Setup page will display all RX RGB fans connected to the System Hub and allow you to re-order them to better match the physical placement inside your system.

  • Mouseover the LINK System Hub tile and select Lighting Setup.
RX_Fans_iCUE_Home
  • Select the RX RGB under Lighting Setup to re-arrange your fans.
RX_Fans_iCUE_FanArangement_1

5. Configure iCUE - Fan Lighting

Choose your desired lighting animation from several pre-defined lighting effects.

  • Select RX RGB from the navigation bar.
  • Click “Lighting Effects” to access the lighting effects page and select the desired lighting effect.
  • Click the “+” icon under “Lighting Layers” to add additional lighting effects.
RX_Fans_iCUE_FanLighting

6. Configure iCUE - Fan Performance

Select your desired fan curve presets between Quiet, Balanced, Extreme, or create your own curve.

  • Select the RX RGB from the navigation bar.
  • Click “Cooling” to access the fan performance page.
  • Select the desired fan curve preset for each fan.
  • ... or click the “+” icon under “Cooling Presets” to create a custom fan curve.
RX_Fans_iCUE_FanPerformance

7. Additional Setup


Visit our CORSAIR LAB for additional iCUE setup, configuration and tips.


POWER RATING

System Hub Output rating: 12Vdc 7A (per port)

RX120 RGB Input rating: 12Vdc 0.66A

RX140 RGB Input rating: 12Vdc 0.7A (no load)


WARRANTY

Warranty_5.max-165x165

iCUE LINK RX RGB Series fans have a 5-year warranty.


LEGAL

© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.