快速入門指南

CORSAIR iCUE LINK RX FANS

PWM FANS

RX_Fans_Main_Visual
CORSAIR_iCUE_LINK_BW_Logo_max-1000x400_Uncropped

CONTENTS

Expansion Fan

RX_Expansion_Kit
  • One (1) fan
  • Two (2) connectors
  • Four (4) QuikTurn mounting screws

120mm Starter Kit

RX_120mm_Kit
  • Three (3) fans
  • iCUE LINK System Hub
  • Two (2) iCUE LINK cables
  • One (1) power cable
  • One (1) Micro-USB cable
  • Four (4) connectors
  • Twelve (12) QuikTurn mounting screws

140mm Starter Kit

RX_140mm_Kit
  • Two (2) fans
  • iCUE LINK System Hub
  • Two (2) iCUE LINK cables
  • One (1) power cable
  • One (1) Micro-USB cable
  • Two (2) connectors
  • Eight (8) QuikTurn mounting screws

GETTING TO KNOW YOUR RX

RX_Getting_to_Know
  1. iCUE LINK RX fan
  2. iCUE LINK System Hub
  3. QuikTurn mounting screws
  4. Active bridge connector
  5. Passive connector
  6. iCUE LINK cable
  7. Micro-USB cable
  8. Power cable
  9. Active port
  10. Passive port

GETTING TO KNOW YOUR SYSTEM HUB

Getting_To_Know_System_Hub.max-800x600

I. Active port
K. Power input
L. USB input
M. Tach output

FAN INSTALLATION

BEFORE YOU START

Alert_Orange_925SUrT.max-800x600
To ensure proper operation, keep the active ports free of any foreign objects/materials. Please use the RX and accessories as defined in this document.
Alert_Orange_925SUrT.max-800x600
Turn the computer off prior to the installation of the RX and accessories.

STARTER KIT

This section will provide a brief guide on how to install your RX Starter Kit.

RX_Setup1
RX_Setup2

Create or add into a fan group


Connect the RX fan into an existing fan group by aligning and inserting the connectors into the open active (I) and passive ports (J).

Set up the RX fan group


After connecting your RX fans together, insert the iCUE LINK cable (F) into an open active port (I) on your RX fan.


RX_Setup3
QX140_RGB_RENDER_31_Ehmihbs.max-800x600

Install RX inside the case


Mount the RX fans onto your case with the supplied QuikTurn mounting screws (C).

Please note that QuikTurn screws thread much faster than traditional self-tapping screws; we advise only hand-tightening QuikTurn screws with a screwdriver to avoid over-threading your RX fans.

Connect fan to iCUE LINK System Hub


Connect the power cable (H), Micro-USB cable (G), and iCUE LINK cable (F) into the System Hub (B), then connect the power cable (H) and Micro-USB cable (G) into your power supply and motherboard, respectively.


Sys_Hub_Connection
Blank_frame.max-800x600

Mount iCUE LINK System Hub to your case


The iCUE LINK System Hub (B) can be magnetically mounted on a steel chassis or adhered to a surface with the supplied mounting tape.


EXPANSION FAN

This section will provide a brief guide on how to install your RX Expansion fan.

RX_Setup1
RX_Setup2

Create or add into an existing fan group


Connect the RX Expansion fan into an existing fan group by aligning and inserting the connectors into the open active (I) and passive ports (J).

Connect RX to an iCUE LINK System Hub


Insert the iCUE LINK cable (F) into an open active port (I) on your RX fan.


Sys_Hub_Connection
Blank_frame.max-800x600

Connect fan to iCUE LINK System Hub

Connect the iCUE LINK Cable (F) into an available active port (I) on the iCUE LINK System Hub (B - sold separately).


SOFTWARE SETUP

1. Install iCUE

Learn more and download the latest CORSAIR iCUE software

CORSAIR_iCUE_Color_Logo_mspGYp3.max-800x600_Cropped

2. Update iCUE

  • Once iCUE is installed, run the software. If a newer iCUE version is available or if any of the connected devices need a firmware update, you will be prompted to perform an update via a notification in the top right corner. You can also click the settings (cog wheel icon in the top right corner) and check for the software and firmware updates manually.
RX_iCUE_Update

3. Configure iCUE - Fan Setup

The Setup page will display all RX fans connected to the System Hub and allow you to re-order them to better match the physical placement inside your system.

  • Mouseover the LINK System Hub tile and select Lighting Setup.
RX_iCUE_Home
  • Select the RX under Lighting Setup to re-arrange your fans.
RX_Fans_iCUE_FanArangement

4. Configure iCUE - Fan Performance

Select your desired fan curve presets between Quiet, Balanced, Extreme, or create your own curve.

  • Select the RX from the navigation bar.
  • Click “Cooling” to access the fan performance page.
  • Select the desired fan curve preset for each fan.
  • ... or click the “+” icon under “Cooling Presets” to create a custom fan curve.
RX_iCUE_Cooling

5. Additional Setup


Visit our CORSAIR LAB for additional iCUE setup, configuration and tips.


CORSAIR DETACHABLE PLATES COMPATIBILITY

RX fans are compatible with CORSAIR detachable decorative plates (sold separately).

RX_DetachablePlate

POWER RATING

System Hub Output rating: 12Vdc 7A (per port)

RX120 Input rating: 12Vdc 0.58A

RX140 Input rating: 12Vdc 0.62A


WARRANTY

Warranty_5.max-165x165

iCUE LINK RX Series fans have a 5-year warranty.


LEGAL

© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.