快速入門指南
CORSAIR iCUE LINK RX MAX RGB FANS
CONTENTS
Expansion
- One (1) Fan
- Two (2) Connectors
- One (1) iCUE LINK cable
- Four (4) QuikTurn Mounting Screws
- Four (4) AIO Radiator (UNC 6-32) Mounting Screws
- Four (4) Hydro X Radiator (M4xP0.7) Mounting Screws
120mm Starter Kit
- Three (3) Fans
- One (1) iCUE LINK System Hub
- Two (2) iCUE LINK Cables
- One (1) Power Cable
- One (1) Micro-USB Cable
- Four (4) Connectors
- Twelve (12) QuikTurn Mounting Screws
- Twelve (12) AIO Radiator (UNC 6-32) Mounting Screws
- Twelve (12) Hydro X Radiator (M4xP0.7) Mounting Screws
140mm Starter Kit
- Two (2) Fans
- One (1) iCUE LINK System Hub
- Two (2) iCUE LINK Cables
- One (1) Power Cable
- One (1) Micro-USB Cable
- Two (2) Connectors
- Eight (8) QuikTurn Mounting Screws
- Eight (8) AIO Radiator (UNC 6-32) Mounting Screws
- Eight (8) Hydro X Radiator (M4xP0.7) Mounting Screws
GETTING TO KNOW YOUR RX MAX RGB FANS
- iCUE LINK RX MAX RGB Fan
- iCUE LINK System Hub
- QuikTurn Mounting Screws
- AIO Radiator (UNC 6-32) Mounting Screws
- Hydro X Radiator (M4xP0.7) Mounting Screws
- Active Bridge Connector
- Passive Connector
- iCUE LINK Cable
- USB Cable
- Power Cable
- Active Port
- Passive Port
The pre-installed decorative plate on RX MAX RGB is detachable, the fan can be used with or without the decorative plate depending on your preference.
GETTING TO KNOW YOUR iCUE LINK SYSTEM HUB
K. Active Port
M. Power Input
N. USB Input
O. Tach Output
FAN INSTALLATION
BEFORE YOU START
STARTER KIT
This section will provide a brief guide how to install your RX MAX RGB Starter Kit.
Create or Add Into a Fan Group
Connect the RX MAX RGB fan into an existing fan group by aligning and inserting the connectors into the open active (K) and passive ports (L) .
Setting Up the RX MAX RGB Fan Group
After connecting your RX MAX RGB fans together, insert the iCUE LINK cable (H) into an openactive port (K) on your RX MAX RGB fan.
Install RX MAX RGB Inside the Case
Mount the RX MAX RGB fans onto your case with the supplied QuikTurn mounting screws (C).
Please note that QuikTurn screws thread much faster than traditional self-tapping screws; we advise hand tightening QuikTurn screws with a screwdriver only to avoid over threading your RX MAX RGB fans.
Install RX MAX RGB On AIO Radiator
When using RX MAX RGB fans with an AIO radiator, please use the included AIO radiator mounting screws (D) as they are slightly longer to accommodate for the increased thickness of the fans.
Install RX MAX RGB on Hydro X Series Radiator
When using RX MAX RGB fans with a Hydro X Series radiator, please use the included Hydro X Series radiator mounting screws (E) as they are slightly longer to accommodate for the increased thickness of the fans.
Connect Fan to iCUE LINK System Hub
Connect the power cable (J), USB cable (I), and iCUE LINK Cable (H) into the System Hub, then connect the power cable (J) and USB cable (I) into your power supply and motherboard, respectively.
Connect Fan to iCUE LINK System Hub
The iCUE LINK System Hub (B) can be magnetically mounted on a steel chassis or adhered to a surface with the supplied mounting tapes.
EXPANSION FAN
This section will provide a brief guide how to install your RX MAX RGB Expansion Fan.
Create or Add Into a Fan Group
Connect the RX MAX RGB Expansion fan into an existing fan group by aligning and inserting the connectors into the open active (K) and passive ports (L).
Connect RX MAX RGB to iCUE LINK System Hub
Insert the iCUE LINK Cables (H) into an open active port (K) on your RX MAX RGB fan.
Connect Fan to iCUE LINK System Hub
Connect the iCUE LINK Cable (H) into an available active port (K) on the iCUE LINK System Hub (B).
iCUE Setup
1. iCUE Setup
2. Update iCUE
- Once iCUE is installed, run the software. If a newer iCUE version is available or if any of the connected devices need a firmware update, you will be prompted to perform an update via a notification in the top right corner. You can also click the settings (cog wheel icon in the top right corner) and check for the software updates manually.
3. Quick Lighting Setup
Select the predefined Murals effects from the iCUE Home screen to quickly change the lighting effects.
4. Configure iCUE - Fan Setup
The Setup page will display all RX MAX RGB fans connected to the System Hub and allow you to re-order them to better match the physical placement inside your system.
- Mouseover the iCUE LINK System Hub tile and select Lighting Setup.
- Select the RX MAX RGB under Lighting Setup to rearrange your fans.
5. Configure iCUE - Fan Lighting
Choose your desired lighting animation from several pre-defined lighting effects.
- Select the RX MAX RGB from the navigation bar.
- Click “Lighting Effects” to access the lighting effects page and select the desired lighting effect.
- Click the “+” icon under “Lighting Layers” to add additional lighting effects.
6. Configure iCUE - Fan Performance
Select your desired fan curve presets between Quiet, Balanced, Extreme, or create your own curve.
- Select the RX MAX RGB from the navigation bar.
- Click “Cooling” to access the fan performance page.
- Select the desired fan curve preset for each fan.
- ... or click the "+" icon under "Cooling Presets" to create a custom fan curve.
7. Additional Setup
Visit our CORSAIR LAB for additional iCUE setup, configuration, and tips.
FAQ
Why can’t I change my lighting effect?
Murals may be preventing you from selecting a lighting effect. Please disable Murals by clicking on the Murals Indicator located on the Home screen or from the iCUE LINK device page.
Does RX MAX RGB support hot-plugging?
The iCUE LINK System Hub and RX MAX RGB fans do not support hot-plugging but you can use “Device Enumeration” in the iCUE LINK System Hub device settings to force iCUE LINK device re-enumeration without a power cycle.
How many fans can be chained through one channel?
Up to twelve (12) RX MAX RGB fans can be chained and connected simultaneously through one (1) channel on the System Hub.
POWER RATING
Output rating: 12Vdc 7A (per port)
RX120 MAX RGB Input rating: 12Vdc 0.22A
RX140 MAX RGB Input rating: 12Vdc 0.29A
WARRANTY
iCUE LINK RX MAX RGB SERIES fans have a 5-year warranty.
LEGAL
© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.