快速入門指南

CORSAIR H55 | H100 | H150 RGB Series

PERFORMANCE RGB LIQUID CPU COOLERS

H50-H100-H150_Hero_Image

BEFORE YOU START

NOTE: Most newer PC cases include a CPU cutout to allow access to the underside of the motherboard. If your case does not include a cutout, you will need to remove your motherboard from the case before installation. RGB Series coolers come with the Intel mounting bracket pre-installed on the pump for quick installation.

VIDEO TUTORIAL


INTEL INSTALLATION

INCLUDED HARDWARE

Highlighted parts for Intel installation only.

Standoff_Intel_1700_1

4x Intel 1700 standoffs

Standoff_Intel_1200_115_2

4x Intel 1200/115x standoffs

Bckplt_Intel_1700_3

1x Intel 1700 backplate

Bckplt_Intel_1200_115_4

1x Intel 1200/115x backplate

Mnt_brckt_Intel_5

1x Intel mounting plate (pre-installed)

Thmb_Scrw_6

4x Thumbscrews

Stndf_AMD_AM5AM4_Gray_7

4x AMD AM5/AM4 standoffs

Mnt_brckt_AMD_Gray_8

1x AMD AM5/AM4 mounting bracket

Scrw_Long_Fan_9

8x Long fan screws (H55)
16x Long fan screws (H100)
24x Long fan screws (H150)

Scrw_Radiator_10

4x Radiator screws (H55)
8x Radiator screws (H100)
12x Radiator screws (H150)

Wshr_11

8x Washers (H55)
16x Washers (H100)
24x Washers (H150)

Fan_SP_RGB_Elite_12

1x SP RGB ELITE fan (H55)
2x SP RGB ELITE fans (H100)
3x SP RGB ELITE fans (H150)

Harness_Mthrbrd_13

1x Motherboard ARGB harness

Cbl_FanSplitter_14

1x Fan splitter


1. INSTALL THE BACKPLATE

Backplate_Installation_Intel

2. INSTALL THE INTEL STANDOFFS

• Fasten the provided Intel standoff for your socket.
• Use (1) for LGA 1700 or (2) for LGA 1200/115x.
• Tighten all four screws until firmly secured.

Standoff_Installation_Intel

3. INSTALL THE PUMP

• Align the bracket and pump over the standoff screws and fasten the thumbscrews (6) to the standoff screws as shown.
• Tighten the thumbscrews (6) until all four corners are firmly secured.

Pump_Installation_Intel

4. INSTALL THE FANS AND RADIATOR

• Attach the radiator and fans as shown.

Fan_Installation

AMD INSTALLATION

INCLUDED HARDWARE

Highlighted parts for AMD installation only.

Standoff_Intel_1700_Gray_1

4x Intel 1700 standoffs

Standoff_Intel_1200_115_Gray_2

4x Intel 1200/115x standoffs

Bckplt_Intel_1700_Gray_3

1x Intel 1700 backplate

Bckplt_Intel_1200_115_Gray_4

1x Intel 1200/115x backplate

Mnt_brckt_Intel_Gray_5

1x Intel mounting plate (pre-installed)

Thmb_Scrw_6

4x Thumbscrews

Stndf_AMD_AM5AM4_7

4x AMD AM5/AM4 standoffs

Mnt_brckt_AMD_8

1x AMD AM5/AM4 mounting bracket

Scrw_Long_Fan_9

8x Long fan screws (H55)
16x Long fan screws (H100)
24x Long fan screws (H150)

Scrw_Radiator_10

4x Radiator screws (H55)
8x Radiator screws (H100)
12x Radiator screws (H150)

Wshr_11

8x Washers (H55)
16x Washers (H100)
24x Washers (H150)

Fan_SP_RGB_Elite_12

1x SP RGB ELITE fan (H55)
2x SP RGB ELITE fans (H100)
3x SP RGB ELITE fans (H150)

Harness_Mthrbrd_13

1x Motherboard ARGB harness

Cbl_FanSplitter_14

1x Fan splitter


1. INSTALL THE AMD AM5/AM4 MOUNTING BRACKET

• Remove the integrated Intel mounting bracket (Image 1).
• Install the AMD bracket by sliding it into the slot on the pump until secure (Image 2).

NOTE: It is important that the AMD retention bracket is evenly secured on all sides before installation.
Bracket_Installation_AMD

2. PREPARE THE MOTHERBOARD FOR THE INSTALLATION

• Remove the existing plastic AMD mounting brackets as shown.

Bracket_Removal_AMD

3. INSTALL THE AMD STANDOFFS

• Fasten the provided included AMD standoffs to the existing AMD backplate.
• Tighten all four standoffs until firmly secured.

AMD_Standoffs_Installation

4. INSTALL THE PUMP

• Align the bracket and pump over the standoff screws and fasten the thumbscrews (6) to the standoff screws as shown.
• Tighten the thumbscrews (6) until all four corners are firmly secured.

Pump_Installation_AMD

5. INSTALL THE FANS AND RADIATOR

• Attach the radiator and fans as shown.

Fan_Installation

PUMP AND FANS INSTALLATION

1. CONNECT THE PUMP AND FANS TO THE MOTHERBOARD

• Connect the pump's 3-pin cable to the motherboard's CPU_FAN header (Image 1).

IMPORTANT: Do not utilize voltage fan control on the CPU_FAN header with the pump connected for the best performance experience.

• Connect all the fans to the included PWM Y-Splitter cable (Image 2).
• Connect the Y-Splitter cable to any open 4-pin PWM fan header on your motherboard.

Fan_Pump_Connection

2. CONNECT FAN / PUMP RGB TO THE MOTHERBOARD (OPTIONAL)

If your motherboard supports +5V digital RGB protocol, you may use the included adapter to connect your pump and fans to the 3-pin connector on the bottom or top corner of your motherboard for RGB control. This port is commonly called JRGB, ARGB, or 5V RGB.

*The pump and fan LEDs get power from the motherboard or control device. If they are not connected, they will not illuminate.

Signal_Scheme

FAQ

How do I know the direction of the airflow of the fan?

FAQ1_IMG

An arrow located on the side of the fan indicates the direction of airflow.



Can I reuse the pre-applied thermal paste on the cooler for re-installation?

Re-installation of the cooler will require you to clean off the pre-applied thermal paste and apply a new layer of thermal paste. Visit us at CORSAIR.com to choose one of our performance thermal pastes.



What orientation should I install my radiator?

FAQ2_IMG

For optimal performance, we recommend installing the radiator with the tubes positioned at the bottom of the case. However, you have the flexibility to install the radiator in various orientations, including an inverted position. Please ensure that the highest point of the radiator is elevated above the level of the CPU pump, regardless of the installation orientation.




WARRANTY

Warranty_3

CORSAIR Performance RGB Liquid CPU coolers have a 3-year warranty


LEGAL

© 2023 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.


POWER RATING

12Vdc 0.31mA (H55 RGB Cooler / RWF0059)
12Vdc 0.31mA (H100 RGB Cooler / RWF0059)
12Vdc 0.31mA (H150 RGB Cooler / RWF0059)