RMx ATX 3.1 PSUs: Cable compatibility

The latest RMx ATX 3.1 2024 Series of power supplies comes with fully modular cables. You only need to use the cables you need for your system and can store the remaining cables for when it comes to future upgrades.

RMx ATX 3.1 2024 Series uses Type 4 cables as well as a native 12V-2x6 cable to be used with compatible graphics cards.

You must make sure to only use compatible cables. Incompatible cables can cause catastrophic failure to components.

• 1x ATX 24-pin Cable
  610mm (± 10mm)
• 2x EPS/ATX12V 8-pin (4+4) Cable
  750mm (± 10mm)
• 1x PCIe 12V-2x6-pin (12+4) Cable
  650mm (± 10mm)
• 2x PCIe 8-pin (6+2) Cable
  650mm ± 10mm
• 2x SATA (4 Connectors) Cable
  850mm (± 10mm)
• 1x PATA (3 Connectors) Cable
  750mm (± 10mm)

Grab the new RM750x from our webstore!

• 1x ATX 24-pin Cable
  610mm (± 10mm)
• 2x EPS/ATX12V 8-pin (4+4) Cable
  750mm (± 10mm)
• 1x PCIe 12V-2x6-pin (12+4) Cable
  650mm (± 10mm)
• 3x PCIe 8-pin (6+2) Cable
  650mm (± 10mm)
• 2x SATA (4 Connectors) Cable
  850mm (± 10mm)
• 1x PATA (3 Connectors) Cable
  750mm (± 10mm)

The new RM850x is available from our webstore right now!

• 1x ATX 24-pin Cable
  610mm (± 10mm)
• 2x EPS/ATX12V 8-pin (4+4) Cable
  750mm (± 10mm)
• 1x PCIe 12V-2x6-pin (12+4) Cable
  650mm (± 10mm)
• 4x PCIe 8-pin (6+2) Cable
  650mm (± 10mm)
• 3x SATA (4 Connectors) Cable
  850mm (± 10mm)
• 2x PATA (3 Connectors) Cable
  750mm (± 10mm)

The RM1000x is now available!