HOW TO

How to install a CORSAIR AIO Tube Sleeving Kit

If you're looking to add a dash of color to an otherwise monochrome system, or perhaps improve color coordination among components, our tube sleeving kits are the perfect solution, and come in gray, red, and white. In addition to adding that finishing touch to your PC, they’re quick and easy to install.

First, you’ll want to make sure your tube sleeving kit length is appropriate for your All-in-One CPU cooler. Tube lengths for our AIOs can be found under “Tech Specs” on their respective product page. However, to save some time, you can refer to the chart below to find the correct sleeving length for your AIO.

AIO Model/Size Tubing Length
iCUE LINK, ELITE CAPELLIX XT, ELITE LCD XT
H100i (240mm) / H115i (280mm) 400mm
H150i (360mm) / H170i (420mm) 450mm
ELITE
H100i (240mm) / H115i (280mm) / H150i (360mm) 400mm
ELITE CAPELLIX
H100i (240mm) / H115i (280mm) 380mm
H150i (360mm) 400mm
H170i (420mm) 450mm
ELITE LCD
H100i (240mm) / H150i (360mm) 380mm
H170i (420mm) 450mm

How to install CORSAIR AIO Tube Sleeving Kit

AIO_CPU_Cooler_Sleeving_Kit_GREY_RENDER_06
AIO_CPU_Cooler_Sleeving_Kit_GREY_RENDER_05

Now you know which length of tubing will work for your AIO, you can install it. We strongly recommend installing the sleeving kit onto the AIO when it's outside of the case. So, if you've already installed it, remove it from the system. (No need to unmount it from the CPU, just unscrew the radiator and pull it out of the case a bit to expose the tubing more clearly.)

If the AIO is a fresh upgrade, install the sleeving before putting the AIO into the case. This is the easiest way of doing it and can save some fiddling. We've included photos of the process for your convenience.

Step 1: Unbox the CORSAIR AIO Tube Sleeving Kit. You'll find the two sleeves designed to cover the tubing of your cooler, as well as four clamps to secure the sleeves in place.

Step 1

Step 2: Along the sleeves, you’ll find an opening. Starting from one end of your AIO’s tubing, envelop the tubing into the sleeving and slowly work your way along the entire length of the tubing. With the appropriate length sleeving kit, it will be the perfect length for your AIO’s tubing.

Picture2

Step 3: Once the sleeving is in place, carefully install the clamps onto each end of the sleeving. Depending on your AIO model, it is advised to exercise additional care when installing the clamps at the pump’s end to avoid any surface damage. Each clamp has two clips and secures your sleeving in place.

Step 4: Put the AIO back into the system and admire your handywork. Enjoy the enhanced aesthetics and personalised touch.

AIO_CPU_Cooler_Sleeving_Kit_RED_RENDER_04

PRODUCTS IN ARTICLE

CONTENIDO RELACIONADO