How to change the panels on the 2500D/X

The CORSAIR 2500 Series of small form-factor PC cases have a dual chamber design that ensures an organized and efficient build, separating heat-generating components from the rest of the system to maintain optimal performance. Designed with customization and future-proofing in mind, it offers extensive cooling options to keep up with the most demanding system upgrades while compatibility with reverse connection motherboards further enhance its aesthetic charm, offering a cable-free showcase of your system’s innards.

If you're interested in knowing more about the 2500 Series Case, you can check out our EXPLORER article where you'll find everything you need to know.

One of the advanced customizatrion features of the 2500 Series Case is the option to switch out the front and roof panels with our ELITE PANEL KITS.

There are five kits to choose from that include three wooden (Bamboo, Teak, or Walnut) and two metal (Obsidian or Satin Gray) design options.

In this article, we are going tom show you how to replace the factory panels on your 2500 Case with your chosen ELITE PANEL KIT. These panels are very easy to swap out and can be done is just three simple steps, so lets begin.

Unscrew the front panels from the inside and the top panels from the rear.

Once you remove the front panel screws, it should fall forward for removal. The top panels will slide off the chasis, just slide towards the back of the case.

Now you'll need to uninstall the existing I/O from the panel by removing the two screws that hold it in place and migrate it to the new top panel.

Finally, reinstall the screws in the front panels and slide the top panels on and screw them in from the rear.

So really, that's all you need to do to install your new ELITE PANEL KIT.

Don't forget that if you need a great TOOLKIT, the CORSAIR webstore carries one that's just right for all of your PC, console, and electronic repairs.