HOW TO

iCUE LINK LCD AIO Screen Troubleshooting

When your iCUE LINK LCD AIO or iCUE LINK AIO LCD Screen Module is experiencing an error, it will display an icon. Should you encounter one, such as the red triangle (general fault), you can perform the following troubleshooting steps.

iCUE_LINK_AIO_LCD_Screen_Module_WHITE_RENDER_11

Method 1:

  1. Power cycle your system by completely powering down and unplugging the power cord from a wall outlet.
  2. Make sure that the system has completely discharged by pressing and holding the power button.
  3. Plug the power cord back into a wall outlet and power your system back on.

Method 2:

  1. In CORSAIR iCUE, navigate to the either Firmware Updates or the Device Settings menu for the System Hub and check for a firmware update. If no firmware update is available, select the “force update” option to re-flash the latest firmware for the System Hub.
  2. This should only be done if power-cycling your system did not restore normal operation to the iCUE LINK LCD screen.
SystemHub_Firmware2
SystemHub_Firmware1

System Hub firmware may be updated in iCUE Settings

System Hub firmware may also be updated in Device Settings

PRODUCTS IN ARTICLE

المحتوى ذي الصلة