BEFORE YOU START
GETTING TO KNOW
1. iCUE LINK TITAN RX LCD
2. iCUE LINK RX RGB FANS
The pre-installed decorative plate (3) on the RX RGB is detachable. The fan can be used with or without the decorative plate, depending on your preference.
3. iCUE LINK SYSTEM HUB
INCLUDED HARDWARE
1x iCUE LINK AIO Pump Module – LCD (Pre-Installed)
1x Intel LGA 1851/1700
Mounting Bracket Set (Pre-Installed)
1x Intel LGA 1851/1700 Backplate
1x AMD AM5/AM4
Mounting Bracket Set
16x Long Fan Screws (240)
24x Long Fan Screws (360)
8x Radiator Screws (240)
12x Radiator Screws (360)
8x Washers (240)
12x Washers (360)
2x RX RGB (240)
3x RX RGB (360)
1x System Hub
1x 150mm PCIe Power Cable
1x 500mm Micro USB 2.0 Cable
1x 600mm Type-C USB 2.0 Cable
1x 150mm USB Splitter Cable
1x 800mm Tach Cable
1x 250mm iCUE LINK Cable With
Dual 90° Connectors
1x 600mm iCUE LINK Cable With
Dual 90° Connectors
1x 600mm iCUE LINK Cable With Straight/90° Connectors
PREPARE iCUE LINK TITAN RX LCD FOR INSTALLATION
1. CONNECT iCUE LINK CABLES
2. ROUTE THE iCUE LINK CABLE
3. CONNECT THE TACH CABLE
INTEL INSTALLATION
1. INSTALL THE BACKPLATE
2. INSTALL THE PUMP UNIT
3. INSTALL THE RADIATOR
AMD INSTALLATION
1. INSTALL THE AMD MOUNTING BRACKET
2. PREPARE THE MOTHERBOARD FOR INSTALLATION
3. INSTALL THE PUMP UNIT
4. INSTALL THE RADIATOR
CONNECT THE iCUE LINK DEVICES
iCUE LINK SYSTEM HUB INSTALLATION
1. CONNECT THE iCUE LINK CABLES
2. CONNECT THE POWER CABLE
3. CONNECT THE DATA CABLE
4. CONNECT TACH CABLE
5. MOUNT SYSTEM HUB
SOFTWARE SETUP
VIDEO TUTORIAL
See our comprehensive iCUE setup video guide. This visual guide provides a step-by-step walkthrough of iCUE setup detailed in the writing below.
1. INSTALL iCUE
2. UPDATE FIRMWARE FOR CONNECTED DEVICES
3. LIGHTING SETUP
Quick Lighting Setup
Lighting Setup
The Lighting Setup page will display all iCUE LINK devices connected to the System Hub and allow you to re-order them to better match the physical placement inside your system.
Lighting Effects
Choose which lighting effect will be displayed when the iCUE software is running:
Device Memory Mode
Choose which lighting effect will be displayed when iCUE software is not running, usually during computer the startup phase:
4. SCREEN SETUP
Choose which screen effect will be displayed when the iCUE software is running:
Device Memory Mode
Choose which screen effect will be displayed when the iCUE software is not running, usually during computer startup phase:
5. COOLING SETUP
AIO Fans Setup
Identify which fan(s) are mounted on the radiator. iCUE will automatically assign the AIO-based fan curve for the selected fans.
Cooling Performance
Select your desired cooling presets for any other fans connected to the System Hub between Quiet, Balanced, Extreme, or create your own curve:
Device Memory Mode
Choose how your fan(s) and/or pump will perform when the iCUE software is not running, usually during computer startup phase:
5. ADDITIONAL SETUP
Visit our CORSAIR LAB YouTube channel and Explorer page for additional setup, configuration and tips:
FAQ
Is it safe to use an alternative PCIe adapter cable to provide power to the System Hub?
To ensure proper operation of the System Hub and iCUE LINK devices, please connect the supplied 6-pin female connector directly to a dedicated PCIe power cable from the power supply. Connecting an adapter cable such as a SATA to PCIe between the System Hub PCIe power cable and power supply may negatively impact the performance of your iCUE LINK devices and/or system overall.
What is CapSwap technology and how does it work with the iCUE LINK TITAN RX LCD CPU coolers?
With CapSwap, you can easily replace the pump cap with an aesthetic module like the iCUE LINK Pump Cap - Groove (sold separately) to customize your iCUE LINK TITAN RX LCD CPU cooler. Visit this link for a list of compatible CapSwap modules.
How do I know the direction of the airflow of the fan?
An arrow located on the side of the fan indicates the direction of airflow.
My cooler and fans are blinking red or not functioning. What do I do?
If the fans on your system are blinking red, this is an indication that too many iCUE LINK devices are connected to a single port on the System Hub. The maximum number of devices that can be connected to a single port is 12. To resolve this issue, please distribute the iCUE LINK devices across both available ports on the System Hub. This will ensure adequate power distribution to all connected devices.
If you continue to experience issues or find that the fans are not functioning at all, please perform the following:
If this does not resolve your problems, please open a support ticket or contact our customer support team for further troubleshooting and assistance at https://help.corsair.com/hc/requests/new.
In what orientation should I install my radiator?
For optimal performance, we recommend installing the radiator with the tubes positioned at the bottom of the case (Figure 1). However, you have the flexibility to install the radiator in various orientations, including an inverted position. Please ensure that the highest point of the radiator is elevated above the level of the CPU pump, regardless of the installation orientation (Figure 2).
Can I reuse the pre-applied thermal paste on the cooler for re-installation?
Re-installation of the iCUE LINK TITAN RX LCD CPU cooler will require you clean off the pre-applied thermal paste and apply a new layer of thermal paste. We recommend using CORSAIR XTM70, sold separately.
What should I do if I lost or broke a specific part or accessory from the iCUE LINK TITAN RX LCD CPU cooler?
POWER RATING
System Hub Output rating: 12Vdc 7A (per port)
RX120 RGB Input rating: 12Vdc 0.66A
WARRANTY
All CORSAIR iCUE LINK coolers have a 6-year warranty.
LEGAL
©2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.