HOW TO

How to Install an AIO CPU Cooler – AMD

Whether you’re building your first PC or upgrading your current one, the cooling of your CPU plays an important role in the overall performance of your system. One of the best options is an AIO, or all-in-one, cooler that offers everything you need for premium cooling in one straightforward package. CORSAIR offers a full range of AIO coolers to match a variety of budgets, from the single-fan Hydro Series H60 all the way up to the triple-fan iCUE H150i ELITE LCD XT Display, which has an LCD panel on top of the pump block.

Find out more at: CORSAIR CPU Liquid Coolers.

Installing an all-in-one liquid CPU cooler on an Intel platform is simple.

AIO Cooler Header_import

First, check your motherboard CPU socket and confirm that it is supported by your liquid CPU cooler’s mounting hardware.

bracketswap_aio_import

From the factory, the cooler will have a mounting bracket intended for Intel CPU sockets installed. This bracket will need to be replaced with the appropriate mounting bracket for your intended CPU socket.

Intel socket CPU Standoffs_import

Now, grab the appropriate standoffs and screw them into the mounting points on the frontside of the backplate.

Prepare your cooler_import

Prepare your cooler by attaching the included fans to the radiator.

Now install the assembled radiator into your system.

Check the pump head to ensure that the correct mounting bracket is installed.

Be careful not to touch the pre-applied thermal paste on the bottom of the pump head if you need to swap mounting brackets.

Mounting the AIO pump head_import

Align the holes on the mounting bracket with the standoffs installed earlier.

Gently place the pump head onto the processor, ensuring that the standoffs go through the holes in the mounting bracket.

Secure the pump head into place with the provided thumbscrews, making sure to hand tighten only in a criss-cross pattern.

If your cooler includes a fan and lighting controller, find an appropriate space in your system and install it using the provided mounting tape.

Plugging in USB Cable_import
Plugin cables_import
Popup Image

Your cooler should then connect to your system through both the CPU_FAN header and a USB2.0 header on your motherboard.

Connecting power cable_import

Finally, anything that requires power from your power supply should be connected as well.

Your CORSAIR all-in-one CPU liquid cooler should now be installed and you can continue with the rest of your build!

PRODUCTS IN ARTICLE

CONTENU CONNEXE