INTRODUCTION
Product Setup, User Information, and Warranty/Dead Pixel policy can be found at https://qsg.corsair.com/xeneon-monitors
PRECAUTIONS
PACKAGE CONTENTS
XENEON 32UHD144-A DISPLAY CONTENTS
ASSEMBLY
Before you begin, you will need a Phillips head screwdriver.
TILT, SWIVEL AND HEIGHT ADJUSTMENT
Your Xeneon display features a sturdy and stylish stand that offers tilt, swivel, and height adjustment.
TILT
SWIVEL
HEIGHT ADJUSTMENT
RAPIDROUTE CABLE MANAGEMENT
Your Xeneon display has built-in RapidRoute cable management to keep your desktop tidy. There are 2 adjustable cable clips that slide up and down the monitor post to allow for customizing your cable management needs. Open each cable clip by pressing the thumb clasp to the left and pulling out on the cable clip.
WALL MOUNT COMPATIBILITY
Before mounting your display with compatible wall mount (VESA 100mm x 100mm), make sure that:
Review the instructions that came with your wall mount for more information about how to correctly mount your display.
WARNING: Your display has four VESA mounting holes on the back. You must secure a wall mount bracket to all four holes. If you do not use all four holes, your display may fall and cause property damage or personal injury.
Note: Wall-mount screws are not included. Screws: type M4, 14mm to 16mm length depending on wall mount.
CONNECTIVITY
OPERATIONS
CONTROLS
Your monitor includes a joystick on the rear, right facing side for opening shortcuts and navigating display settings. Note that many of these settings can also be controlled in CORSAIR iCUE software if you have the USB hub connected to your computer via USB IN port.
Please install the latest version of iCUE (4.24 or later) available at https://www.corsair.com/us/en/icue.
ON-SCREEN DISPLAY (OSD)
By pressing the joystick inward, you can access your monitor’s display settings. You can use the joystick to navigate the settings and pressing the joystick inward will confirm your selection.
OSD - PICTURE SETTINGS
The first menu, labeled “Picture”, contains the following settings for adjusting the overall picture quality.
SETTING | OPTIONS | DESCRIPTION |
Picture Mode | Standard | Selects a display preset factory calibrated for general use and best power savings. |
Movie | Selects a display preset optimized for watching movies. | |
Text | Selects a display preset optimized for reading text. | |
sRGB | Selects a display preset factory calibrated to the sRGB color space. | |
Creative | Selects a display preset factory calibrated for content creation tasks. | |
Game | Selects a display preset optimized for playing fast moving games. | |
DCI-P3 | Selects a display preset optimized for HDR content in DCI-P3 color space. | |
AdobeRGB | Selects a display preset optimized for HDR content in AdobeRGB color space. | |
HDR | Shows HDR when HDR-mode is selected in the Operating System Display Settings. | |
Brightness | 0-100 | Adjusts the intensity of the display backlight. |
Contrast | 0-100 | Adjusts the display’s contrast. |
Sharpness | 0-10 | Adjusts the display’s sharpening filter, increasing edge detail. |
Color Temperature | Cool | Sets the display’s color temperature to 9300K. |
Normal | Sets the display’s color temperature to standard 6500K. | |
Warm | Sets the display’s color temperature to 5000K. | |
Custom | Allows you to manually set the display’s color temperature with sliders controlling the red, blue, and green levels. | |
Gamma | 2.0, 2.2, 2.4 | Adjusts the relationship between color and brightness; default is 2.2. |
Saturation | 0-10 | Adjusts the intensity of the display’s colors. |
Eye Saver | ON or OFF | Reduces blue light emissions of display when enabled. |
Response Time | Normal, Fast, Faster, Fastest, Dynamic OD | Let you increase how fast pixels can transition between colors, which can reduce the blurring of fast-moving objects. |
Refresh Overlay | ON or OFF | Toggles an overlay in the top right corner which displays the monitor’s current refresh rate, useful for tracking frames per second when Adaptive Sync is enabled. |
MPRT | ON or OFF | Toggles the “Moving Picture Response Time” setting, which can reduce blurring of moving objects when set to “On.” |
Local Dimming | ON or OFF | To turn off specific portions of the backlight for deeper black and better contrast ratio. |
Crosshair | OFF, Dot, Cross, Angle | Enable Crosshair function. |
OSD - OSD SETTING
The second menu, labeled “OSD Setting”, contains the following settings for adjusting the on-screen display.
SETTING | OPTIONS | DESCRIPTION |
Language | English Français Deutsch Italiano Español Português Русский 繁體中文 日本语 한국어 |
Selects the OSD's language. |
Transparency | ON or OFF | Sets the OSD to be transparent or opaque. |
Time Out | Text | Adjusts how long (in seconds) the OSD stays on screen before disappearing. |
OSD - SYSTEM SETTING
The third menu, labeled “System Setting”, contains the following settings for adjusting the display’s internal settings.
SETTING | OPTIONS | DESCRIPTION |
Aspect Ratio | Auto, 4:3, 16:9 | Selects the display’s aspect ratio. “Auto” will try to match the display’s aspect ratio to the incoming video signal. Not available with Adaptive Sync enabled. |
AMD FreeSync Premium | ON or OFF |
Enables or disables the adaptive sync functionality when connected to a compatible GPU. Select ON to enable Adaptive Sync for AMD FreeSync via HDMI. NVIDIA G-Sync compatibility is available when connected via DP cable or USB Type-C Alt Mode cable to compatible GPU. For NVIDIA G-Sync functionality: • Install/Open NVIDIA Control Panel. May require a system reboot to access NVIDIA settings. |
LED | ON or OFF | Selects front Power LED indicator ON or OFF. |
Source Detection | AUTO or MANUAL | Determines whether the display will automatically switch to a different input if it detects a signal, or if you will need to manually switch between inputs. |
USB-C Alt Mode (only present when the display is connected through USB-C video port) |
4-lane |
Toggles the number of USB lanes to use on the USB-C port for video. • 4-Lane Mode allows up to 3840x2160@144Hz resolution but reduces the speed of the USB Type-A ports to USB 2.0. |
Factory Reset |
- |
Resets all monitor settings to their factory defaults. |
OSD - AUDIO
The fourth menu, labeled “Audio”, lets you control the display’s audio.
SETTING | OPTIONS | DESCRIPTION |
Volume | 0-100 | Adjusts the volume of the audio output from the headphone jack. |
Audio Input |
Auto, HDMI-1, HDMI-2, DisplayPort, USB Type-C |
Selects which input the display passes audio to the headphone jack from. “Auto” will use the current input. |
OSD - INPUT SELECT
The fifth menu, labeled “Input Select”, lets you switch between the display’s different inputs.
SETTING | DESCRIPTION |
HDMI-1 | Switches to the device connected to the HDMI-1 port. |
HDMI-2 | Switches to the device connected to the HDMI-2 port. |
DisplayPort | Switches to the device connected to the “DP” DisplayPort port. |
TYPE-C | Switches to the device connected to the TYPE-C port. |
OSD - INFORMATION
Provides current settings status for key features.
SETTING | DESCRIPTION |
Source | Display the current input source. |
Resolution | Display the current display resolution. |
Refresh Overlay | Display the current refresh rate. |
AMD FreeSync Premium | AMD FreeSync Premium Status. |
HDR | HDR Status. |
FW Version | Shows the current FW version. |
APPENDIX
TECHNICAL SPECIFICATIONS
Product Name | XENEON 32UHD144-A |
Part Number | CM-9020006 |
Device | RDD0021 |
USB Hub ID | CORSAIR USB 3.0 Hub |
Panel Size | 32" Diagonal |
Display Surface | Non-Glare |
Pixels per inch | 138 |
Aspect Ratio | 16:9 |
Native Resolution | 3840 x 2160 @ 144Hz |
Response Time (MPRT) | 1ms |
Response Time (GtG) | 12ms |
Display Colors | 1.07B colors (10bit RGB) |
Panel Technology | IPS with Quantum Dot Technology |
Flicker Free | Yes |
Viewing Angles | 178° (H) / 178° (V) |
Peak Brightness | 350 nit (SDR) / 600 nit (HDR) |
Static Contrast Ratio | 1000:1 |
HDR Certification | VESA DisplayHDR 600 |
Color Gamut (CIE 1976) | 98% (DCI-P3), 100% (AdobeRGB), 100% (sRGB) |
Variable Refresh Rate | AMD FreeSync Premium Certified, NVIDIA G-Sync compatible |
HDMI Input | 2x HDMI 2.1 |
DisplayPort Input | 1x DisplayPort 1.4 |
USB-C Input | 1x DisplayPort 1.4 (USB-C Alt Mode), 15W Power Delivery, USB 5Gbps Data Upstream |
USB-C Upstream Input | 1x 5Gbps USB-C |
USB-A Output | 2x 5Gbps Type-A USB (5V/0.9A *2) |
3.5mm Audio | Yes, passthrough from video input |
Power Consumption (On) | 43W |
Power Consumption (Sleep) | <0.5W |
Power Consumption (Off) | <0.3W |
VESA Compatibility | 100mm x 100mm |
Dimensions | 732mm x 553mm x 270mm (W x H x D) |
Weight | 8.4kg |
Stand Tilt | -5° / +20° |
Stand Swivel | -30° / +30° |
Stand Height Adjustment Range | 68mm |
AC Adapter | 150W |
Note: your device uses the following power supply: Asian Power Devices Inc. / DA-150E19 |
SUPPORTED DISPLAY MODES
RESOLUTION | REFRESH RATE | HDMI | DP/TYPE-C | |
640x480 | VGA | 60Hz | V | V |
67Hz | V | V | ||
72Hz | V | V | ||
75Hz | V | V | ||
720x400 | Dos-Mode | 70hz | V | V |
800x600 | SVGA | 56Hz | V | V |
60Hz | V | V | ||
72Hz | V | V | ||
75Hz | V | V | ||
1024x768 | XGA | 60Hz | V | V |
70Hz | V | V | ||
75Hz | V | V | ||
1152x864 | XGA+ | 75Hz | V | V |
1280x720 | WXGA | 60Hz | V | V |
1280x960 | WXGA | 60Hz | V | V |
1280x1024 | SXGA | 60Hz | V | V |
75Hz | V | V | ||
1440x900 | WXGA+ | 60Hz | V | V |
1680x1050 | WSXGA+ | 60Hz | V | V |
1920x1080 | FHD | 60Hz | V | V |
144Hz | V | |||
2560x1440 | QHD | 60Hz | V | V |
120Hz | V | V | ||
144Hz | V | V | ||
3840x2160 | UHD | 60Hz | V | V |
120Hz | V | V | ||
144Hz | V | V | ||
480P | 60Hz | V | V | |
576P | 50Hz | V | V | |
720P | 50Hz | V | V | |
60Hz | V | V | ||
120Hz | V | V | ||
1080P | 60Hz | V | V | |
120Hz | V | V | ||
2160P | 30Hz | V | V | |
50Hz | V | V | ||
60Hz | V | V | ||
120Hz | V | V |
HDMI LEGAL DISCLOSURE
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.