KIT CONTENTS
1x XTM60 High-Performance Thermal Paste
1x Applicator Card
APPLICATION GUIDE
Before you start
1. Prepare the Contact Surface
Prepare the contact surface and wipe the surface clean with a lint-free wipe.
Tip: Isopropyl alcohol can aid in the removal of thermal paste. Observe appropriate precautions when using flammable solvents. Solvent-cleaned surfaces should be thoroughly dried before applying XTM60.
2. Apply XTM60
Dispense a small amount of the (A) XTM60 on the middle of the contact surface, then spread evenly using the (B) Applicator Card.
3. Install Cooling Unit
Install your cooling unit onto the contact surface as instructed by the unit manufacturer.
LEGAL
© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.