GETTING TO KNOW YOUR RS FANS
A. One (1) Fan
B. Four (4) Mounting Screws
A. Three (3) 120mm Fans
B. Twelve (12) Mounting Screws
A. Two (2) 140mm Fans
B. Eight (8) Mounting Screws
FAN INSTALLATION
BEFORE YOU START
1. INSTALL THE RS FANS INSIDE THE CASE
2. CREATE A FAN GROUP
* Skip this step if you plan to use the fan individually.
3. CONNECT FAN(S) TO 4-PIN OR 3-PIN FAN HEADER
FAN SETUP
Fan speeds are configured and managed by the devices to which the 4-pin cable is connected. In most situations this is typically the motherboard via a fan header, which would require entering BIOS to configure fan speeds. Please refer to your motherboard manual for additional details.
FAQ
Can I connect the 4-pin cable connector into a 3-pin fan header on the motherboard or fan controller?
Yes, you can, but keep in mind, installing a 4-pin connector on a 3-pin header will no longer benefit from PWM control.
In which direction does the air flow?
CORSAIR fans have little arrows on the side of the fan frame that indicate the direction the fan blades spin as well as the direction in which the air flows.
How many fans can I chain together?
Most motherboard fan headers can typically provide up to 1A, which would be about 3 fans.
POWER RATING
RS120 Input rating: 12Vdc 0.4A
RS140 Input rating: 12Vdc 0.45A
WARRANTY
CORSAIR RS Series fans have a 5-year warranty.
LEGAL
© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.