MANUAL | QUICK START GUIDE

iCUE LINK TITAN RX RGB

HIGH-PERFORMANCE AIO CPU COOLER WITH RGB FANS

Titan_Main_Hero
CORSAIR_iCUE_LINK_Color_Logo_max-1000x400_Uncropped

BEFORE YOU START

NOTE: Most newer PC cases include a CPU cut-out to allow access to the back of the motherboard. If your case does not include a cut-out, you will need to remove the motherboard from the case prior to installation.
NOTE: iCUE LINK AIO coolers come with the Intel mounting bracket pre-installed on the pump for quick installation – should you have an AMD system, please remove this bracket and use the included AMD bracket instead. Proceed to the AMD Installation Section for more details. 

GETTING TO KNOW

TITAN 240 RX RGB

RX_RGB_GettingToKnow_240

TITAN 280 RX RGB

RX_RGB_GettingToKnow_280

TITAN 360 RX RGB

RX_RGB_GettingToKnow_360
1. iCUE LINK TITAN RX RGB 5. Fan and Radiator Mounting Screws
2. iCUE LINK RX RGB Fans

6. USB Type-C Port (for LCD screen CapSwap)
3. Intel and AMD Mounting Brackets 7. iCUE LINK Active Port
4. iCUE LINK Bridge Connectors (Active and Passive)  

The pre-installed decorative plate (3) on the RX RGB is detachable. The fan can be used with or without the decorative plate, depending on your preference.

RX_RGB_Fans_GettingToKnow
1. iCUE LINK Active Port 3. Decorative Plate (Pre-installed)
2. iCUE LINK Passive Port  
AIO_LCD_Getting_To_Know_3
1. iCUE LINK Active Port 3. USB Input
2. Power Input 4. Tach Output

INCLUDED HARDWARE

Intel_1851_1700_Bracket_A

1x Intel LGA 1851/1700
Mounting Bracket
(Pre-installed)

Intel_1851_1700_Backplate_B

1x Intel LGA 1851/1700
Backplate

AMD_AM4_5_Bracket

1x AMD AM5/AM4
Mounting Bracket Set

Radiator_Screw_Long_D

16x Long Fan Screws (240 | 280)
24x Long Fan Screws (360)

Radiator_Screw_Short_E

8x Radiator Screws (240 | 280)
12x Radiator Screws (360)

Washers_F

8x Washers (240 | 280)
12x Washers (360)

RX_RGB_Fan_G

2x RX RGB (240 | 280)
3x RX RGB (360)

System_Hub_H

1x System Hub

PCIe_Power_Cable_I

1x 150mm PCIe Power Cable

Micro_USB_Cable_J

1x 500mm Micro USB 2.0 Cable

Tach_Cable_K

1x 800mm Tach Cable

iCUE_LINK_Cable_250_L

1x 250mm iCUE LINK Cable With Dual 90° Connectors

iCUE_LINK_Cable_600_M

1x 600mm iCUE LINK Cable With Dual 90° Connectors

iCUE_LINK_Cable_600_2_N

1x 600mm iCUE LINK Cable With Straight/90° Connectors


NOTE: The next steps will display one of several ways to complete a circuit with the TITAN RX RGB mounted in the top of a case with an iCUE LINK fan (sold separately) mounted in the rear.
  • Connect the iCUE LINK cables (L,M) into the radiator-mounted RX RGB fans as shown below.
Titan_Preparing_1
  • Route the long iCUE LINK cable (N) through the nearest cut-out from the pump.
Titan_Preparing_2

3. CONNECT THE TACH CABLE

  • Connect the 3-pin, 1-wire tach cable (K) into CPU_FAN header on the motherboard then route it behind the motherboard tray.
RX_RGB_TachCable_Connection_Large

INTEL INSTALLATION

1. INSTALL THE BACKPLATE

  • Remove protective film from the self-adhesive side on Intel LGA 1851/1700 backplate (B).
  • Align the backplate (B) then adhere it with the self-adhesive side behind the motherboard.
Intel_Backplate_Titan

2. INSTALL THE PUMP UNIT

  • Align the screws and pump over the backplate then fasten the screws in a cross pattern going from opposite corners.
  • Tighten the bracket (A) screws until all four corners are tightened.
Intel_Pump_Titan

3. INSTALL THE RADIATOR

  • Insert the other end of the short cable (L) into the rear fan then mount the radiator inside the case with the short screws (E) and washers (F) as shown.
  • Route the 600mm iCUE LINK cable (M) behind the motherboard tray.
Titan_Radiator_Install

Continue to the System Hub Installation


AMD INSTALLATION

1. INSTALL THE AMD MOUNTING BRACKET

  • Replace the pre-installed Intel mounting bracket (A) with the AMD mounting bracket (C).
NOTE: It is important that the AMD AM5/AM4 retention bracket be evenly secured on all sides before installation.
Titan_AMD_Bracket_Install

2. PREPARE THE MOTHERBOARD FOR INSTALLATION

  • Remove the existing AMD AM5/AM4 mounting brackets shown.
AMD_Prepare_Motherboard_Installation-01

3. INSTALL THE PUMP UNIT

  • Align the screws and pump over the backplate then fasten the screws in a cross pattern going from opposite corners.
  • Tighten the bracket (C) screws until all four corners are tightened.
AMD_Pump_Titan

4. INSTALL THE RADIATOR

  • Insert the other end of the short cable (L) into the rear fan then mount the radiator inside the case with the short screws (E) and washers (F) as shown.
  • Route the 600mm iCUE LINK cable (M) behind the motherboard tray.
Titan_Radiator_Install

CONNECT THE TITAN RX RGB PUMP

  • Insert the 90° connector from the 600mm iCUE LINK cable (N) into the pump.
Titan_Hub_Connection

  • Connect the iCUE LINK cables (M,N) into the System Hub (H).
Titan_Hub_Connection_2

2. CONNECT THE POWER CABLE

  • Connect the 6-pin microfit connector (I) into the System Hub (H).
  • Connect the 6-pin PCIe connector (I) into a dedicated PCIe power cable from the power supply.
NOTE: Please note that the power cable (H) and your PSU's 6-pin PCIe cable are keyed to fit one orientation only. Failure to connect the power cable (H) will cause damage to the iCUE LINK System Hub.
Titan_Hub_Connection_3

3. CONNECT THE DATA CABLE

  • Connect the micro-USB cable (J) into the System Hub (H).
  • Connect the 9-pin USB connector (J) into a USB 2.0 header on the motherboard.
Titan_Hub_Connection_4

4. CONNECT TACH CABLE

  • Connect the 2-pin, 1-wire tach cable (K) from into the System Hub (H).
Titan_Hub_Connection_5

5. MOUNT SYSTEM HUB

  • Mount the System Hub (H) inside the case magnetically or with the supplied tape.
Titan_Hub_Mounting

SOFTWARE SETUP

VIDEO TUTORIAL

See our comprehensive iCUE setup video guide. This visual guide provides a step-by-step walkthrough of iCUE setup detailed in the writing below.

1. INSTALL iCUE

CORSAIR_iCUE_Color_Logo_mspGYp3.max-800x600_Cropped

2. UPDATE FIRMWARE FOR CONNECTED DEVICES

  • Once iCUE is installed run the software. If any of the connected devices need a firmware update, you will be prompted to perform an update via a notification in the top right corner. You can also click the settings (cog wheel icon in the top right corner) and check for the software and firmware updates manually.
Titan_iCUE_1

3. LIGHTING SETUP

Quick Lighting Setup

  • Select the predefined Murals effects from the iCUE Home screen to quickly change the lighting effects.
Titan_iCUE_2

Lighting Setup

The Lighting Setup page will display all iCUE LINK devices connected to the System Hub and allow you to re-order them to better match the physical placement inside your system.

  • Mouseover the System Hub tile and select Lighting setup.
Titan_iCUE_3
  • Re-arrange your iCUE LINK devices to match your setup.
  • Click on the box icon on the right to display all devices inside the window, if needed.
Titan_iCUE_4

Lighting Effects

Choose what lighting effect will be displayed when the iCUE software is running:

  • Select either the iCUE LINK TITAN RX RGB AIO or RX RGB from the navigation bar.
  • Click "Lighting Effects" to access the lighting effects page and select the desired lighting effect.
  • Click the "+" icon under "Lighting Layers" to add additional lighting effects.
Titan_iCUE_5

Device Memory Mode

Choose what lighting effect will be displayed when iCUE software is not running, usually during computer the startup phase:

  • Select either the iCUE LINK TITAN RX RGB AIO or RX RGB from the navigation bar.
  • Toggle the Device Memory Mode by clicking on the button.
  • Once the desired setting is selected, click on the save icon.
Titan_iCUE_9

4. COOLING SETUP

AIO Fans Setup

  • Select the iCUE LINK TITAN RX RGB AIO from the navigation bar.
  • Click “Fans Setup” and click "Run Wizard".
Titan_iCUE_6

Identify which fan(s) are mounted on the radiator. iCUE will automatically assign the AIO-based fan curve for the selected fans.

  • Select the fan(s) that are mounted on the radiator by clicking on the UI then click "finish".
Titan_iCUE_7

Cooling Performance

Select your desired cooling presets for any other fans connected to the System Hub between Quiet, Balanced, Extreme, or create your own curve:

  • Select either the iCUE LINK TITAN RX RGB or RX RGB from the navigation bar.
  • Click "Cooling" to access the cooling performance page.
  • Select the desired cooling preset for each device.
  • Click the "+" icon under "Cooling Presets" to create a custom fan curve.
Titan_iCUE_8

Device Memory Mode

Choose how your fan(s) and/or pump will perform when iCUE software is not running, usually during the computer startup phase:

  • Select either the iCUE LINK TITAN RX RGB AIO or RX RGB from the navigation bar.
  • Toggle the Device Memory Mode by clicking on the button.
  • Once the desired setting is selected, click on the save icon.
Titan_iCUE_10

5. ADDITIONAL SETUP

Visit our CORSAIR LAB YouTube channel and Explorer page for additional setup, configuration and tips:

CORSAIR LAB YouTube channel

CORSAIR EXPLORER web page


FAQ

Is it safe to use an alternative PCIe adapter cable to provide power to the System Hub?


To ensure proper operation of the System Hub and iCUE LINK devices, please connect the supplied 6-pin female connector directly to a dedicated PCIe power cable from the power supply. Connecting an adapter cable such as a SATA to PCIe between the System Hub PCIe power cable and power supply may negatively impact the performance of your iCUE LINK devices and/or system overall.



What is CapSwap technology and how does it work with the iCUE LINK TITAN RX RGB CPU coolers?

Titan_CapSwap_FAQ

With CapSwap, you can easily replace the pump cap with an aesthetic module like the iCUE LINK Pump Cap - Groove (sold separately) or a functional module like the iCUE LINK LCD module (sold separately) to customize your iCUE LINK TITAN RX RGB CPU cooler. Visit this link for a list of compatible CapSwap modules.



Do I need to connect a USB Type-C cable into the iCUE LINK TITAN RX RGB pump?

TITAN_240_RX_RGB_BLACK_RENDER_23

No, it is not required for the iCUE LINK TITAN RX RGB to function properly. This USB Type-C port is used when upgrading to the iCUE LINK LCD module.



How do I know the direction of the airflow of the fan?

FAQ_image-01_1

An arrow located on the side of the fan indicates the direction of airflow.



My cooler and fans are blinking red or not functioning. What do I do?


If the fans on your system are blinking red, this is an indication that too many iCUE LINK devices are connected to a single port on the System Hub. The maximum number of devices that can be connected to a single port is 12. To resolve this issue, please distribute the iCUE LINK devices across both available ports on the System Hub. This will ensure adequate power distribution to all connected devices.


If you continue to experience issues or find that the fans are not functioning at all, please perform the following:

  • Double check all connections between the cooler and fans.
  • Ensure that your devices are updated to the most recent firmware via iCUE.


If this does not resolve your problems, please open a support ticket or contact our customer support team for further troubleshooting and assistance at https://help.corsair.com/hc/requests/new.



In what orientation should I install my radiator?

Titan_FAQ_Case

For optimal performance, we recommend installing the radiator with the tubes positioned at the bottom of the case (Figure 1). However, you have the flexibility to install the radiator in various orientations, including an inverted position. Please ensure that the highest point of the radiator is elevated above the level of the CPU pump, regardless of the installation orientation (Figure 2).



Can I reuse the pre-applied thermal paste on the cooler for re-installation?


Re-installation of the iCUE LINK TITAN RX RGB CPU cooler will require you clean off the pre-applied thermal paste and apply a new layer of thermal paste. We recommend using CORSAIR XTM70, sold separately.



What should I do if I lost or broke a specific part or accessory from the iCUE LINK TITAN RX RGB CPU cooler?


Replacement parts for iCUE LINK TITAN RX RGB CPU coolers are sold through the No content yet! CORSAIR webstore.




POWER RATING

System Hub Output rating: 12Vdc 7A (per port)

RX120 RGB Input rating: 12Vdc 0.66A

RX140 RGB Input rating: 12Vdc 0.7A


WARRANTY

Warranty_6

All CORSAIR iCUE LINK coolers have a 6-year warranty.


LEGAL

©2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.