INTRODUCTION
Congratulations on your new CORSAIR TC500 LUXE chair. This guide will help you assemble and operate the chair.
The images shown below are meant to be representative. Actual details of textures, materials, and logos may appear different, but the assembly and operation will remain the same as in this guide.
We also have a video guide for most of our chairs and products on the CORSAIR LAB YouTube Channel, found here:
PACKAGE CONTENTS
INSTALLATION
1. Install casters
2. Install piston and cover
3. Install seat mechanism to seat base
4. Adjust arm rests (optional)
If desired, you can adjust the width of the arm rests at this time by partially loosening the screws (I), sliding the arm rest to its desired location, then re-fastening them.
5. Place seat on chair base
6. Rotate left side support bracket towards rear of chair
7. Slide the chair back onto the right support bracket, then secure with screws
8. Rotate left side bracket up, then secure with screws
9. Screw in the bracket covers and then place the logo plugs over the open holes
10. Attach the memory foam neck pillow (optional)
USER MANUAL
1. Recline adjustment
2. Tilt tension adjustment
3. Tilt lock
The left-side lever will lock and unlock the chair tilt function.
4. Height adjustment
5. Arm rest adjustment
6. Lumbar adjustment
For optimal lower-back support, the TC500 LUXE is equipped with a configurable lumbar adjustment built into the chair.
WARRANTY
All CORSAIR Gaming chairs have a 2-year warranty.
LEGAL
© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.