How to Install an AMD Processor

Installing an AMD processor is a straightforward operation, but it’s always a good idea to check that the motherboard socket, chipset, and motherboard BIOS revision are compatible with your intended CPU. AMD has released many CPUs over the years, and there are plenty of different sockets and pin-outs for its chips, so definitely double-check before you begin.

If your motherboard does require a UEFI/BIOS update, check the motherboard manual for further information on how to perform the operation.

To install the CPU, start by locating the CPU socket on the motherboard. As the socket has sensitive pins inside it, you will generally find that there's a plastic cover on top of it to protect it.

Open the latch by pressing the lever down and swinging it out, before releasing it so that it flips back. Ensure that it is open all the way.

There is a triangle or dot printed on the motherboard to indicate which corner to align the processor with. Match this marking with the copper-colored triangle on the CPU, and gently place it into the socket so that it rests on the pins.

Once you’re confident that the processor is properly seated, lower the latch and close the lever to secure it into place. The protective plastic cover will pop off on its own and can be set aside. It’s a good idea to keep this cover should you need to send your motherboard in for any kind of service.

That's it, you've installed your CPU into the motherboard, ready for your cooling solution of choice.

If you don't already have a CPU cooler, then CORSAIR has a range of CPU coolers to choose from.

Once you’ve wrapped up your build or finished with your upgrade, fire up your PC and ensure that the latest chipset and platform drivers are installed!