Need help replacing the memory of your Vengeance Gaming PC? We have a guide to help you out.

Before replacing the memory...

Before you begin to replace your memory, make sure you do the following:

• Make sure your PC is powered off.
• Disconnect all cables that may get in the way.
• Make sure the switch on the back of your PSU is turned off.
• Disconnect your PSU from the main AC power cable.

Replacing the memory

To replace the memory of your Vengeance Gaming PC:

1. Remove the side panel of your Vengeance PC by unscrewing the two screws at the back of your system and lifting the panel out.
   
   
   
2. Disconnect the 4 fan connectors on the back of your PC.
3. Remove the top filter of your PC radiator.
   
   
   
4. Unscrew the 8 screws holding down the PC radiator.
5. Remove the radiator.
6. Set aside the AIO cooler so you can access the RAM; you do not need to completely detach the AIO cooler from your PC.
7. Press down on the top tabs locking the RAM in place to cause the RAM to pop up.
   
   
   
8. Remove the RAM.
9. Replace the RAM; make sure to line up the kits with the correct orientation of the slots to prevent damage to the board and memory.
10. Reattach the radiator to the top of your PC case.
11. Reconnect all disconnected cables and connectors.
12. Reattach the side panel of your PC case.
13. Power on your PC and see if there are any issues.