HOW TO

How to assemble your Xeneon 32QHD165 gaming monitor

Need help assembling your Xeneon gaming monitor? We have a guide to help you out.

 

 

Assembling your monitor

To assemble your monitor, you will need a Phillips head screwdriver. Once you have that, follow the instructions below:

  1. Remove the top layer of foam that contains the accessories and monitor stand to expose the rear panel of the monitor.
  2. Carefully open the foam bag covering the panel to expose the mounting area.
    • NOTE: Do NOT remove the panel from the bag.
  3. Align the monitor post with the mounting slots on the back of the panel.
  4. Slide the upper hooks into the mounting slots on the back of the panel.
    monitor_assembly_-_slide_post_into_back.jpg

  5. Use your Phillips head screwdriver to secure the post to the panel with the 4 included screws.
  6. Attach the stand base to the monitor post.
    monitor_assembly_-_secure_base_and_post.jpg

  7. Tighten the captive thumbscrew into the bottom of the post.
    monitor_assembly_-_tighten_captive_screw.jpg

  8. Slowly remove your monitor from the packaging and sit it upright on your desk or table.
    • NOTE: Make sure you do NOT touch the front of the panel when lifting the monitor.

관련 콘텐츠