매뉴얼 | 빠른 시작 가이드

CORSAIR RS MAX Series

PWM THICK FANS

RS_MAX_Fans_Main_Visual

CONTENTS

Single

RS_MAX_Single_Fan
  • One (1) fan
  • Four (4) QuikTurn screws
  • Four (4) AIO radiator mounting screws 6-32 x 34mm
  • Four (4) Hydro X Series radiator mounting screws M4 x 35mm

120mm Triple Pack

RS_MAX_Triple_Pack
  • Three (3) 120mm fans
  • Twelve (12) QuikTurn screws
  • Twelve (12) AIO radiator mounting screws 6-32 x 34mm
  • Twelve (12) Hydro X Series radiator mounting screws M4 x 35mm

140mm Twin Pack

RS_MAX_Twin_Pack
  • Two (2) 140mm fans
  • Eight (8) QuikTurn screws
  • Eight (8) AIO radiator mounting screws 6-32 x 34mm
  • Eight (8) Hydro X Series radiator mounting screws M4 x 35mm

GETTING TO KNOW YOUR RS MAX

RS_MAX_GettingToKnow
  1. RS MAX fan(s)
  2. QuikTurn mounting screws
  3. AIO radiator mounting screws
  4. Hydro X Series radiator mounting screws

FAN INSTALLATION

BEFORE YOU START


Alert_Orange_925SUrT.max-800x600
Turn the computer off prior to the installation of the RS MAX fans.

NOTE: QuikTurn screws thread much faster than traditional self-tapping screws; we advise hand tightening QuikTurn screws with a screwdriver only, to avoid overthreading your RS MAX fans.
RS_MAX_Case_Install
RS_MAX_RadInstall

1a. Install RS MAX into the case


Mount the RS MAX fans onto your case with the supplied [B] QuikTurn mounting screws.

1b. Install RS MAX on AIO radiator


When using RS MAX fans with an AIO radiator, please use the included AIO radiator mounting screws [C] as they are slightly longer to accommodate for the increased thickness of the fans.

RS_MAX_RadInstall_Hydro
RS_MAX_ConnectorPlug

1c. Install RS MAX on Hydro X Series radiator


When using RS MAX fans with a Hydro X Series radiator please use the included Hydro X Series radiator mounting screws [D] as they are slightly longer to accommodate for the increased thickness of the fans.

Connect fan to 4-pin or 3-pin fan header


Connect the 4-pin cable into an available 3-pin or 4-pin fan header on your motherboard or fan controller (A 4-pin header is necessary for PWM control). Ensure that the fan connector guides line up with the guide on the fan header.


FAN SETUP

Fan speeds are configured by the devices to which the 4-pin cable is connected. In most situations this is typically the motherboard via a fan header, which would require entering BIOS to configure fan speeds. Please refer to your motherboard manual for additional details.


FAQ

Can I connect the 4-pin cable connector into a 3-pin fan header on the motherboard or fan controller?

Yes, you can, but keep in mind, installing a 4-pin connector on a 3-pin header will no longer benefit from PWM control.



In which direction does the air flow?

RS_MAX_FAQ_Image

CORSAIR fans have little arrows on the side of the fan frame that indicate the direction the fan blades spin as well as the direction in which the air flows.




POWER RATING

RS MAX 120 Input rating: 12Vdc 0.2A

RS MAX 140 Input rating: 12Vdc 0.22A


WARRANTY

Warranty_5.max-165x165

CORSAIR RS MAX Series fans have a 5-year warranty.

LEGAL

© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.