The MP600 PRO Hydro X Edition has a pre-installed Hydro X Series XM2 M.2 SSD Water Block. We have a video to help you install it into your system.
Video instructions
Installing the M.2 SSD
Make sure that your PC system is powered down before you begin installation.
- Find an available M.2 key M 2280 slot on your motherboard.
- For shorter M.2 cards, make sure no screws / standoffs remain on the standoffs.
- Insert the M.2 NVME SSD into the slot.
- Secure the SSD with a screw.
![XM2_M.2_SSD_Water_Block_-_securing_screw.jpg](https://help.corsair.com/hc/article_attachments/360084703532/XM2_M.2_SSD_Water_Block_-_securing_screw.jpg)
- Install the two XF G1/4" BSPP threaded-type fittings onto the water block ports.
- Make sure you tighten the fittings by hand. Do NOT use tools to tighten the fittings.
![XM2_M.2_SSD_Water_Block_-_install_fittings.jpg](https://help.corsair.com/hc/article_attachments/360084703512/XM2_M.2_SSD_Water_Block_-_install_fittings.jpg)
- Install and secure the the water block tubing onto the ports.
- Either port can be used as the inlet or outlet; use whichever one works best for your configuration.
Make sure that you do a leak test before you power on your PC system.