CORSAIR 480T & 480T RGB

Hard drive cage and HDD sleds sold separately.

3x 2.5” SSDs mount directly to the chassis, no sleds required.

PSU cover mounted SSD trays sold separately.

1. Mount the fans inside your case with the provided mounting screws:
- Front: 3x 120mm* / 2x 140mm (A)
- Top: 3x 120mm / 2x 140mm (B)
- Rear: 1x 120mm (C)

2. If you are using a single fan, connect the RGB LED cable from the AR RGB fan to the ARGB adapter cable to enable 5V ARGB (Addressable RGB) 3-pin header connection. If you are using a triple fan kit, connect the RGB LED cables from each AR RGB fan in sequence (1 > 2 > 3) to the 1-to-3 adapter cable.

Connect the ARGB connector from the ARGB adapter cable or 1-to-3 ARGB adapter cable to the +5V ARGB header on a compatible motherboard.

Connect the 4-pin PWM connector into an available 3-pin or 4-pin (recommended) fan header on your motherboard or fan controller. You can use fan splitter cables (sold separately) if your motherboard does not have enough fan headers.

To ensure that the ARGB header on your motherboard functions properly, it is important to follow the proper procedures for installing the necessary software. The specific software you need to install may vary depending on the make and model of your motherboard, so it is important to refer to your motherboard's manual to determine the exact steps you should follow.

Typically, you will need to download and install a specific software program provided by the motherboard manufacturer. This software program will allow you to control and customize the lighting effects on your ARGB components.

1. Find a location for the iCUE lighting controller that allows the fan RGB LED cable to reach the controller, then mount it with mounting strips included with the controller. The Lighting Node CORE is used as an example in this installation illustration; it is recommended to follow the instructions included with your chosen iCUE lighting controller.

2. Mount the fans inside your case with the provided mounting screws:
- Front: 3x 120mm / 2x 140mm (A)
- Top: 3x 120mm / 2x 140mm (B)
- Rear: 1x 120mm (C)

Connect the 4-pin RGB connector from your AR RGB fan into the iCUE lighting controller in sequential order from port #1 to #6.

1. Plug the 9-pin USB cable from the Lighting Node CORE into an available internal USB 2.0 header on your motherboard or USB hub.
2. Connect the SATA power connector to an available SATA connector from your power supply.

1.Download CORSAIR's latest iCUE software and install it on your computer.

2. Once iCUE is installed, select the “8-LED fan Series” in the Lighting Setup page under Lighting Node CORE.

Please visit our CORSAIR LAB YouTube channel for more tips and instructions on how to get the most out of your new CORSAIR fans.

All CORSAIR computer cases have a 2-year warranty.

© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.