MANUAL | QUICK START GUIDE

XTM60

HIGH-PERFORMANCE THERMAL PASTE

XTM60_Main_Visual

KIT CONTENTS

Thermal_Paste_XTM60_A

1x XTM60 High-Performance Thermal Paste

Thermal_Paste_Applicator_B

1x Applicator Card


APPLICATION GUIDE

Before you start

Alert_Orange_Uncropped
WARNING: XTM60 can be harmful if consumed. Keep out of reach of pets and children. If accidentally ingested, wash the mouth out with water and contact a physician or your local poison control center immediately.

1. Prepare the Contact Surface

Prepare the contact surface and wipe the surface clean with a lint-free wipe.

Tip: Isopropyl alcohol can aid in the removal of thermal paste. Observe appropriate precautions when using flammable solvents. Solvent-cleaned surfaces should be thoroughly dried before applying XTM60.

1_CleaningCPU_XTM60

2. Apply XTM60

Dispense a small amount of the (A) XTM60 on the middle of the contact surface, then spread evenly using the (B) Applicator Card.

XTM60_Paste_Application

3. Install Cooling Unit

Install your cooling unit onto the contact surface as instructed by the unit manufacturer.

3_InstallUnit_XTM60

LEGAL

© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.