The time has come to update our popular small form factor power supply units to meet the latest spec requirements on the market. Meet the 2024 line-up of the CORSAIR SF Series power supplies.
We kept everything that was great about our previous SF models and added compliance with the latest ATX12V version 3.1 and PCIe version 5.1 standards. The 92mm PWM fan with Zero RPM mode is still there, but now with a Fluid Dynamic Bearing for the quietest operation at low loads.
Model |
SF750 |
SF850 |
SF1000 |
SKU Number |
CP-9020284 |
CP-9020256 |
CP-9020257 |
Form Factor |
SFX |
||
Measurements |
100mm x 125mm x 63.5mm |
||
AC Input |
100V - 240V / 10A-5A |
||
80 PLUS / Cybenetic Rating |
80 PLUS Platinum / Cybenetics Platinum |
||
ATX12V Version |
3.1 |
||
EPS12V Version |
2.92 |
||
PCIe Version |
5.1 Ready |
||
Modularity |
Fully Modular |
||
CORSAIR Connector Type (PSU) |
Type-5 Micro-Fit |
||
Cable Type |
Individually Sleeved |
||
Fan Size / Type |
92mm / Fluid Dynamic Bearing |
||
Zero RPM Mode |
Yes |
||
105°C Rated Japanese Capacitors |
Yes |
||
Continuous Operating Temperature |
50°C |
||
Warranty |
7-Years |
||
SFX-to-ATX Adapter Bracket |
Yes |
||
Protections |
OVP (Over Voltage), UVP (Under Voltage), SCP (Short Circuit), OTP (Over Temp), OPP (Over Power) |
The power supply uses a single +12V power rail and comes with all necessary protections for safe operation.
|
SF750 |
SF850 |
SF1000 |
+5V |
20A |
20A |
20A |
+3.3V |
20A |
20A |
20A |
+5V & +3.3V Max Output |
130W |
130W |
130W |
+12V |
62.5A |
70.8A |
83.3A |
+12V Max Output |
750W |
850W |
1000W |
+5Vsb |
3.0A |
3.0A |
3.0A |
+5Vsb Max Output |
15W |
15W |
15W |
Total Power |
750W |
850W |
1000W |
All cables are individually sleeved and for graphics cards you have the option to use either PCIe 6+2 or 12V-2x6 aka 12VHPWR straight out of the box. The connectors on the power supply are only compatible with CORSAIR Type-5 Micro-Fit connectors. Do not use cables that are not 100% compatible with these units, as this could result in catastrophic failure.
|
SF750 |
SF850 |
SF1000 |
ATX 24-Pin |
1 (300mm ± 10mm) |
||
EPS/ATX12V 4+4-Pin |
2 (400mm ± 10mm) |
||
PCI-E 6+2-Pin |
2 (400mm ± 10mm) |
3 (400mm ± 10mm) |
4 (400mm ± 10mm) |
PCI-E 12+4-Pin aka 12V-2x6/12VHPWR |
1 (400mm ± 10mm) |
||
SATA Cable (4x Straight plugs per cable) |
1 (445mm ± 10mm) |
||
SATA Cable (4x Angled plugs per cable) |
1 (445mm ± 10mm) |
||
PATA (3x plugs per cable) |
1 (330mm ± 10mm) |
These power supplies are equipped with a 92mm PWM controlled zero RPM fan that only starts spinning when the power supply load reaches 40% or more. The following applies to each model:
SF750 – Zero RPM up to 300W load
SF850 – Zero RPM up to 340W load
SF1000 – Zero RPM up to 400W load
To further ensure quiet operation even after the fan starts spinning, we have tuned the fans in these units accordingly. You can expect carefully tuned noise performance even when the fan starts spinning. It is important to note that the spinning of the fan is not only related to the load of the power supply, but also kicks in when the temperature inside the unit reaches a certain level. This is important to ensure that the units are operating well within their specifications.
SF750
SF850
SF1000
80 PLUS Platinum efficiency ensures lower energy consumption, noise, temperatures, and your power bill.
SF750
SF850
SF1000