CORSAIR XENEON FLEX 45WQHD240 OLED

Product Setup, User Information, and Warranty/Dead Pixel policy can be found at https://corsair.com/guides/XENEON-FLEX landing page.

• Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer.
• Keep the plastic packaging bag for the product in a place that cannot be reached by children.
• Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.
• The power cord plug must be connected to a properly wired and grounded power outlet.
• Do not touch the plug with wet hands, otherwise can easily cause electric shock.
• Place the monitor in a stable and well-ventilated place.
• Do not place the monitor near any heat sources such as electric radiators or direct sunlight.
• The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects.
• Do not use the monitor near water, drinks, or any type of liquids. Failure to do so may result in electric shock or damage to the monitor.
• Make sure to unplug the monitor from the power outlet before cleaning.
• As the screen surface can be easily scratched, avoid touching the surface with any hard or sharp object. Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the Equipment if required. However, never spray the cleaner directly onto the screen.
• Disconnect the power cable if the Equipment is not being used for a long period of time.
• Do not attempt to disassemble or repair the monitor yourself.

A. CORSAIR XENEON FLEX 45WQHD240 OLED Display Panel
B. Stand Base
C. AC Adaptor
D. AC Power Cable
E. DisplayPort Cable (1.5M)
F. HDMI Cable (1.5M)
G. USB-C Cable (1.5M)
H. USB-A to USB-C cable (1.8M)

1. Remove the top tape and open the box.
2. Take the monitor base stand accessories out.
3. Take the top EPS layer and protection EPS plate out.
4. Remove the 4 buckles and the outer carton.
5. Slowly take the monitor from the packaging and put it face down on your desk. Do not touch the front of the panel while lifting the monitor and place the protection EPS underneath.

Your CORSAIR XENEON FLEX 45WQHD240 OLED monitor can be bent between FLAT and 800R curvature using the side handles found on either side of the monitor. The side handles can be extended by pressing the button on each handle and pulling the handles out until the lock in place with a click.

Grab the handles with each hand being careful not to put your thumbs or hand on the OLED panel.

Bend the panel toward you with a slow, smooth motion. The bending mechanism clicks when reaching full bend range (~800R) and also when bending back to FLAT.

Your CORSAIR XENEON FLEX 45WQHD240 OLED monitor features a sturdy and stylish stand that offers swivel adjustment. You can use the front center, bottom handle to tilt the panel. Depending on your desk surface, you may find it helps to apply pressure to the base or one of the side handles to keep the display from sliding while tilting.

• Tilt -7 / + 15 degrees

Your monitor includes a joystick on the front side for opening shortcuts and navigating display settings. Note that many of these settings can also be controlled in CORSAIR iCUE software if you have the USB hub connected to your computer via USB IN port. Please install the latest version of iCUE (4.33 or later) available at https://www.corsair.com/us/en/icue.

By pressing the joystick inward, you can access your monitor’s display settings. You can use the joystick to navigate the settings and pressing the joystick inward will confirm your selection.

The first menu, labeled “Picture”, contains the following settings for adjusting the overall picture quality.

The second menu, labeled “PIP/PBP”, lets you enable the PIP/PBP functions and display different ways.

The third menu, labeled “OSD Setting”, contains the following settings for adjusting the display’s internal settings.

The fourth menu, labeled “System Setting”, lets you make adjustments to the system settings.

The fifth menu, labeled “Audio”, lets you control the display’s audio volume level. The Audio signal is passed through from the current active Video Input signal.

The sixth menu, labeled “Input Source”, lets you switch between the display’s different inputs.

The seventh menu, labeled “Information”, lets you switch between the display’s different inputs.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

About Low Blue Light & Flicker free

• The monitor should be 50 ~ 70 cm (20 ~ 28 inches) away from your eyes.
• Looking at the screen for an extended period of time causes eye fatigue and may deteriorate your eyesight.
• Rest your eyes for 5 ~ 10 minutes for every 1 hour of product use.
• Reduce your eye strain by focusing on objects far away.
• Frequent blinking and eye exercise help keep your eyes from drying out.

** The Monitor uses a low blue light panel and compliance with TÜV Rheinland Low Blue Light Hardware Solution at factory reset/default setting mode (Ex: Brightness 75%, Contrast: 50%, CCT: Normal, Preset mode: Standard.)