BLOG

How to remove thermal paste from a CPU

Removing thermal paste from a CPU is a fairly easy task and with the right tools and steps, you can do it efficiently and safely. Whether you're upgrading your CPU or simply reapplying thermal paste, follow this guide to ensure you remove old thermal paste without damaging your components.

What You’ll Need

Before you begin, gather the following materials:

  • Isopropyl alcohol (90% or higher)
  • Lint-free cloth
  • Cotton swabs
  • Thermal paste

Step-by-Step Guide

Step 1: Power Down and Unplug

Ensure your computer is completely powered down and unplugged from any electrical source.

Step 2: Remove the CPU Cooler

Carefully detach the CPU cooler from the motherboard. This process may vary depending on your cooler's model, so consult the manufacturer's instructions if you're unsure how to proceed. Once the cooler is removed, you'll see the old thermal paste on both the CPU and the cooler.

Step 3: Apply Isopropyl Alcohol

Moisten a lint-free cloth with isopropyl alcohol. Avoid soaking the cloth; it just needs to be slightly damp.

Step 4: Wipe Down the CPU and Cooler

Gently wipe the surface of the CPU and the cooler with the alcohol-dampened cloth. Use circular motions to lift and dissolve the remaining thermal paste. If there are stubborn bits, apply a bit more isopropyl alcohol and continue wiping until the surfaces are clean.

Step 5: Detail Cleaning with Cotton Swabs

For any hard-to-reach areas, use cotton swabs dipped in isopropyl alcohol. This is especially useful for cleaning around the edges of the CPU.

XTM70

Step 6: Allow to Dry

Give the cleaned surfaces a few minutes to dry completely. Isopropyl alcohol evaporates quickly, so this shouldn't take long.

Step 7: Reapply New Thermal Paste

Once everything is dry, you can go ahead and reapply new thermal paste according to your CPU cooler’s instructions. Typically, a small pea-sized amount in the center of the CPU is sufficient.

Step 8: Reattach the CPU Cooler

Carefully reattach the CPU cooler, ensuring it makes good contact with the newly applied thermal paste. Secure it according to the manufacturer's guidelines.

Step 9: Power Up and Test

Reconnect your PC to power and turn it on. Check your CPU temperatures to ensure the new thermal paste is working effectively.

explorer

Conclusion

Congratulations! You've successfully removed the old thermal paste from your CPU and applied a fresh layer. Regular maintenance like this can help keep your system running efficiently and extend the life of your PC.

PRODUCTS IN ARTICLE

VASTAAVA SISÄLTÖ