CORSAIR XENEON 315QHD165 31.5-INCH GAMING MONITOR

Product Setup, User Information, and Warranty/Dead Pixel policy can be found at https://qsg.corsair.com/xeneon-monitors

• Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer.
• Keep the plastic packaging bag for the product in a place that cannot be reached by children.
• Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.
• The power cord plug must be connected to a properly wired and grounded power outlet.
• Do not touch the plug with wet hands, otherwise can easily cause electric shock.
• Place the monitor in a stable and well-ventilated place.
• Do not place the monitor near any heat sources such as electric radiators or direct sunlight.
• The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects.
• Do not use the monitor near water, drinks, or any type of liquids. Failure to do so may result in electric shock or damage to the monitor.
• Make sure to unplug the monitor from the power outlet before cleaning.
• As the screen surface can be easily scratched, avoid touching the surface with any hard or sharp object. Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the equipment if required. However, never spray the cleaner directly onto the screen.
• Disconnect the power cable if the equipment is not being used for a long period of time.
• The adapter is only used for this monitor, do not use it for other purpose.
• Do not attempt to disassemble or repair the monitor yourself.

Before you begin, you will need a Phillips head screwdriver.

Step 1 to Step 4: Remove the top layer of foam that includes accessories and stand to expose the rear of the panel.

Step 5: Carefully open the foam bag covering the panel to expose the mounting area. Do not remove the panel from the bag.

Step 6 to Step 7: Align the monitor post with the mounting slots on the back of the panel. Slide the upper hooks into the mounting slots on the rear of the panel. Using a Phillips screwdriver, secure the post to the panel with the 4 screws.

Step 8: Attach the stand base to the monitor post and tighten the captive thumbscrew into the bottom of the post.

Step 9: Slowly remove the monitor from the packaging and sit upright on your desk. Do not touch the front of the panel while lifting the monitor.

Your Xeneon display features a sturdy and stylish stand that offers tilt, swivel, and height adjustment.

• Tilt -5 / +20 degrees
• Swivel ± 30 degrees
• Height Adjust Range 68mm

Before mounting your display with compatible wall mount (VESA 100mm x 100mm), make sure that:

• You have removed the stand from the display with a Phillips screwdriver
• The wall mount bracket that you purchased supports the weight of this display.

Review the instructions that came with your wall mount for more information about how to correctly mount your display.

WARNING: Your display has four VESA mounting holes on the back. You must secure a wall mount bracket to all four holes. If you do not use all four holes, your display may fall and cause property damage or personal injury.

Note: Wall-mount screws are not included. Screws: type M4, 14mm to 16mm length depending on wall mount.

Your monitor includes a joystick on the rear, right facing side for opening shortcuts and navigating display settings.

By pressing the joystick inward, you can access your monitor’s display settings. You can use the joystick to navigate the settings and pressing the joystick inward will confirm your selection.

The first menu, labeled “Picture”, contains the following settings for adjusting the overall picture quality.

The second menu, labeled “OSD Setting”, contains the following settings for adjusting the on-screen display.

The third menu, labeled “System Setting”, contains the following settings for adjusting the display’s internal settings.

The fourth menu, labeled “Input Source”, lets you switch between the display’s different inputs.

Provides current settings status for key features.