HANDLEIDING | SNELSTARTGIDS

CORSAIR RS ARGB Series

PWM FANS

RS_RGB_Fans_Main_Visual

GETTING TO KNOW YOUR RS ARGB FANS

Single

RS_RGB_Fans_Single

A. One (1) Fan

B. Four (4) Mounting Screws

120mm Triple Pack

RS_RGB_Fans_Triple

A. Three (3) 120mm Fans

B. Twelve (12) Mounting Screws

140mm Dual Pack

RS_RGB_Fans_Single

A. Two (2) 140mm Fans

B. Eight (8) Mounting Screws

FAN INSTALLATION

BEFORE YOU START


Alert_Orange_925SUrT.max-800x600
Turn the computer off prior to the installation of the RS ARGB fans.

1. INSTALL THE RS ARGB FANS INSIDE THE CASE

  • Mount the RS fans onto your case with the supplied (B) mounting screws.
RS_Fans_Fan_Install

2. CREATE A FAN GROUP

  • Daisy-chain each fan’s PWM connector from one to the next until you’ve completed the chain.

* Skip this step if you plan to use the RS ARGB fan individually.

3500X_Chain_PWM

3. CREATE AN ARGB GROUP

  • Daisy-chain each fan’s RGB connector from to the next until you’ve completed the chain.

* Skip this step if you plan to use the RS ARGB fan individually.

3500X_Chain_ARGB

4. CONNECT FAN(S) TO 4-PIN OR 3-PIN FAN HEADER

  • Connect the PWM extension into an available 3-pin or 4-pin fan header on your motherboard or fan controller. A 4-pin header is necessary for PWM control.
  • Ensure that the fan connector guides line up with the guide on the fan header.
3500X_PWM_Connection

5. CONNECT FAN TO A +5V ARGB HEADER

  • Connect the RGB extension from the last fan and plug directly into into an available +5V ARGB header on your motherboard or fan controller.
  • Ensure that the arrow indicator on the ARGB connector is aligned with the +5V pin on the +5V ARGB header.
3500X_ARGB_Connection

FAN SETUP

1. CONFIGURE FAN SPEED

Fan speeds are configured and managed by the devices to which the 4-pin cable is connected. In most situations this is typically the motherboard via a fan header, which would require entering BIOS to configure fan speeds. Please refer to your motherboard manual for additional details.

2. CONFIGURE FAN LIGHTING

Fan lighting is configured and managed by the device to which the +5V ARGB cable is connected. In most situations this is typically the motherboard via a +5V ARGB header, which would require entering BIOS to configure lighting effects. Please refer to your motherboard manual for additional details.


FAQ

Can I connect the 4-pin cable connector into a 3-pin fan header on the motherboard or fan controller?

Yes, you can, but keep in mind, installing a 4-pin connector on a 3-pin header will no longer benefit from PWM control.



In which direction does the air flow?

RS_MAX_FAQ_Image

CORSAIR fans have little arrows on the side of the fan frame that indicate the direction the fan blades spin as well as the direction in which the air flows.



How many fans can I chain together?

Most motherboard fan headers can typically provide up to 1A, which would be about 3 fans.




POWER RATING

RS120 ARGB Input rating: 12Vdc 0.4A

RS140 ARGB Input rating: 12Vdc 0.45A


WARRANTY

Warranty_5.max-165x165

CORSAIR RS ARGB Series fans have a 5-year warranty.

LEGAL

© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.