With the introduction of iCUE LINK the majority of the Hydro X Series line-up has also gotten the LINK treatment which lets you build cleaner, smarter water cooling loops. One of the key devices of this line-up is the XD5 RGB Elite LCD Pump/Reservoir Combo. The newest addition to the series is the LCD version of this pump unit which we will talk about in this article.
The XD5 RGB Elite LCD might use the same well known pump as it's predecessor but the similarities stop there.
In this article we will run you through why the XD5 RGB Elite LCD is our most advanced Pump/Reservoir combo yet and why we are incredibly excited about it.
iCUE LINK XD5 RGB Elite LCD
iCUE LINK XD5 RGB Elite LCD White
The XD5 RGB Elite LCD comes in two colors: Gray and white.
Major visual changes from the previous generation includes:
Let's dive into some of the other features that makes the XD5 RGB Elite LCD the most advanced CORSAIR pump/res combo to date:
In the box you will find:
None LCD model shown in picture
None LCD model shown in picture
So what port is inlet on the XD5 RGB Elite LCD, and what is outlet? While the XD5 RGB Elite LCD has multiple options for how to connect your inlet and return tubes, you have to use the assigned outlet as shown in the above pictures.
You will also need to be careful not to use the fill port as an inlet as this will cause splashing, and the potential for air to constantly be sucked into the pump due to the fill port not having an inlet tube (as you will see on the top inlet port).
You can also utilize one of the two bottom inlet ports as a drain port.
The built in display let's you show off animated gifs, pictures or various systems stats. Combined with the built in temperature sensor you can show off either your coolant temperature live on the display, or system stats like your CPU and GPU temps.
The Xylem D5 pump motor has been the go-to pump for water cooling enthusiasts for years, and is widely used across multiple brands. We have included this pump in such a way that you no longer need a 4-pin molex cable, or PWM cable to control it, but just a single iCUE LINK cable instead.
One of the most interesting features of the XD5 RGB Elite LCD is the single cable design (in order to run the LCD screen you will need to connect the additional USB type-c cable). Anyone who has ever worked with custom cooling previously knows the struggles of handling the abundance of wires in such a system. Not only that, but the traditional 4-pin Molex cable on the D5 pump motors are almost the only PC component left that uses this plug, meaning that if you want to go down the custom-cooling route you need to put an extra cable with 3-4 molex connectors into your PSU for this one component. Up until now that is.
The previous XD5 pump/reservoir units had five different cables going to, and from it:
The XD5 RGB Elite LCD does away with all of these and replaces them with a single unified cable which easily delivers enough power to the unit while retaining the data capabilities to monitor the temperature sensor and control the pump speed and RGB lighting. Building a custom cooled loop has never been easier.
We have also managed to fit even more RGB LED's into the XD5 RGB Elite LCD for a more even spread of lighting effects. All of course programmable, and auto recognized in iCUE. The XD5 RGB Elite LCD now features 22 individually addressable RGB LED's where the previous generation XD5's had just 10.
The XD5 RGB Elite LCD comes with everything you need to mount it in your system. No need to worry about having to buy "accessory" brackets to mount your pump/reservoir combo to a fan, or radiator—it is all in the box.
With the XD5 RGB Elite LCD you can mount the pump/reservoir on both 120mm and 140mm fans/radiators, or directly on a flat surface.
Did you know that you can easily set the pump to run at 100% speed by the flick of a switch? This is especially handy when you are filling up your system with the included 24pin jumper.
When the pump runs at 100% it is easier to pump the coolant around the loop and get all the air out. Without this switch you would need to boot up the PC, start windows and iCUE and set the pump to 100% speed in iCUE.
Left position is 100% speed, right position is software control
PRODUCTS IN ARTICLE