MANUAL | QUICK START GUIDE
IRONCLAW RGB WIRELESS
FPS / MOBA GAMING MOUSE
GETTING TO KNOW YOUR MOUSE
- LEFT CLICK BUTTON
- RIGHT CLICK BUTTON
- MIDDLE CLICK BUTTON
- PROFILE UP BUTTON
- PROFILE DOWN BUTTON
- DPI UP BUTTON
- DPI DOWN BUTTON
- FORWARD BUTTON
- BACKWARD BUTTON
- OPTION BUTTON
- MULTI-PURPOSE LED INDICATOR
- OPTICAL GAMING SENSOR
- PTFE GLIDE PADS
- POWER / WIRELESS MODE SWITCH
- USB WIRELESS RECEIVER
- USB CHARGING / DATA CABLE
- USB CABLE ADAPTER
CHARGING THE MOUSE
IMPORTANT: The IRONCLAW RGB WIRELESS mouse must be fully charged before its first use.
Connect the IRONCLAW RGB WIRELESS mouse to an available USB 2.0 or 3.0 port on your PC with the USB charging / data cable. The multi-purpose LED indicator on the mouse will begin pulsing green to denote battery charging and will turn solid when charging is complete.
The battery has no “memory effect” and should not be completely discharged before recharging to ensure it will last for hundreds of charge / discharge cycles.
SETTING UP YOUR MOUSE USING 2.4GHz WIRELESS
- Turn on your computer and connect the USB wireless receiver to an available USB port.
- Toggle power / wireless mode switch to “2.4GHz” position to turn on your mouse.
- The multi-purpose LED indicator on your mouse will turn solid white when automatically connected.
- Download the iCUE software from www.corsair.com/downloads.
- Run the installer program and follow instructions for installation.
SETTING UP YOUR MOUSE USING BLUETOOTH.
- Turn on your Bluetooth 4.0 or higher enabled computer and initiate Bluetooth pairing mode on it.
- Hold PROFILE UP button and toggle power / wireless mode switch to BT position to turn on your mouse. The multi-purpose LED indicator will start blinking blue.
- The multi-purpose LED indicator on your mouse will turn solid blue when connected.
MULTI-PURPOSE LED INDICATOR
Various aspects of mouse operation are communicated through multi-purpose LED indicator located on the left side of the mouse.
| MULTI-PURPOSE LED INDICATOR |
|||
| BATTERY STATUS | LED #1 | LED #2 | LED #3 |
| BATTERY CHARGING | PULSING GREEN | OFF | OFF |
| BATTERY CRITICAL, RECHARGE REQUIRED | PULSING RED | OFF | OFF |
| BATTERY LOW, RECHARGE SOON | BLINKING RED | BLINKING RED | OFF |
| BATTERY MEDIUM | BLINKING AMBER | BLINKING AMBER | OFF |
| BATTERY HIGH | BLINKING GREEN | BLINKING GREEN | OFF |
| BATTERY CHARGED | GREEN | GREEN | GREEN |
| WIRELESS STATUS | MULTI-PURPOSE LED INDICATOR |
| 2.4GHz WIRELESS MODE – PAIRING | BLINKING WHITE |
| 2.4GHz WIRELESS MODE – PAIRED | WHITE |
| 2.4GHz WIRELESS MODE – PAIRING FAILED | PULSING WHITE |
| BT WIRELESS MODE – PAIRING | BLINKING BLUE |
| BT WIRELESS MODE – PAIRED | BLUE |
| BT WIRELESS MODE – PAIRING FAILED | PULSING BLUE |
| MULTI-PURPOSE LED INDICATOR |
|||
| DPI STAGE STATUS | LED #1 | LED #2 | LED #3 |
| STAGE #1 | CYAN | OFF | OFF |
| STAGE #2 | CYAN | CYAN | OFF |
| STAGE #3 | CYAN | CYAN | CYAN |
| MULTI-PURPOSE LED INDICATOR |
|||
| ONBOARD PROFILE STATUS | LED #1 | LED #2 | LED #3 |
| PROFILE #1 | RED | OFF | OFF |
| PROFILE #2 | OFF | GREEN | OFF |
| PROFILE #3 | OFF | OFF | BLUE |
The power delivered by the charger must be between min 0.75 Watts required by the radio equipment, and max 3 Watts in order to achieve the maximum charging speed.
COPYRIGHT/LEGAL INFORMATION
© 2018-2025 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.
