HARPOON RGB WIRELESS

IMPORTANT: The HARPOON RGB WIRELESS mouse must be fully charged before its first use.

Connect the HARPOON RGB WIRELESS mouse to an available USB 2.0 or 3.0 port on your PC with the USB charging / data cable. The multi-purpose LED indicator on the mouse will begin pulsing green to denote battery charging and will turn solid when charging is complete.

The battery has no “memory effect” and should not be completely discharged before recharging to ensure it will last for hundreds of charge / discharge cycles.

• Turn on your computer and connect the USB wireless receiver to an available USB port.
• Toggle power / wireless mode switch to “2.4GHz” position to turn on your mouse.
• The multi-purpose LED indicator on your mouse will turn solid white when automatically connected.
• Download the iCUE software from www.corsair.com/downloads.
• Run the installer program and follow instructions for installation.

• Turn on your Bluetooth 4.0 or higher enabled computer and initiate Bluetooth pairing mode on it.
• Hold DPI CYCLE button and toggle power / wireless mode switch to BT position to turn on your mouse. The multi-purpose LED indicator will start blinking blue.
• The multi-purpose LED indicator on your mouse will turn solid blue when connected.

Various aspects of mouse operation are communicated through the multi-purpose LED indicator located behind on top cover of the mouse.

The power delivered by the charger must be between min 0.75 Watts required by the radio equipment, and max 3.75 Watts in order to achieve the maximum charging speed.