HS35 SURROUND v2

The HS35 SURROUND v2 is a multiplatform headset that operates in two audio modes: stereo and surround sound. In stereo mode, you can connect the 3.5mm jack into any PC, Mac, PlayStation, Xbox, Nintendo Switch, or mobile device.

The included surround sound USB adapter enables virtual surround sound on PC and Mac. Remember that powering the surround sound USB adapter requires a high-power (USB 2.0 or better) port. Some USB ports on older keyboards and monitors do not support high-power devices.

Go to corsair.com/support/downloads to download the CORSAIR iCUE software.

Using iCUE software will enable the full feature set of the HS35 SURROUND v2 headset. The surround sound USB adapter must be connected to your PC to use iCUE software.
Note: If the headset is used without software, some features will be disabled.

• Install the iCUE software on a PC running Windows 10 or later.
• After installation is complete, reboot your PC, and launch iCUE.

iCUE software can be used to:

• Select and customize audio equalizer (EQ) settings.
• Set surround sound on or off.

The software’s built-in documentation explains how to use the HS35 SURROUND v2 features in greater detail.

As with any audio product, reduce the volume before trying it with an audio source the first time.

You can adjust the volume with:

• The volume controller on the headset at the bottom corner of your left ear cup.
• The standard Windows audio controller can also be used to adjust volume.

Once an audio source is playing, set the volume to a comfortable level.

Your new HS35 SURROUND v2 headset features a high-performance omni-directional mic designed for crisp clarity with exceptional dynamic range.

Press in the mute button to mute your microphone. To unmute, press the mute button again so that it pops up.

Bend the flexible microphone boom to best fit near the left corner of your mouth.

We’ve found that about a 30-degree bend is a good place to start, but feel free to adjust this if your mic is too loud or too soft.

The floating headband is user-adjustable and can be set to your personal comfort preference. The headband strap is attached via two Velcro straps and can be easily pulled apart and reattached in different locations to adjust the headband size.