GUIA DE INÍCIO RÁPIDO

iCUE LINK H100i | H150i | H170i LCD AIO

ALL-IN-ONE LIQUID CPU COOLER WITH LCD SCREEN

AIO_LCD_Hero
CORSAIR_iCUE_LINK_Color_Logo_max-1000x400_Uncropped

BEFORE YOU START

NOTE: Most newer PC cases include a CPU cut-out to allow access to the bottom of the motherboard. If your case does not include a cut-out, you will need to remove the motherboard from the case prior to installation. iCUE LINK AIO coolers come with the Intel mounting bracket pre-installed on the pump for quick installation.

H100i

AIO_LCD_Getting_To_Know_H100i

H150i

AIO_LCD_Getting_To_Know_H150i

H170i

AIO_LCD_Getting_To_Know_H170i
1. iCUE LINK LCD AIO 8. iCUE LINK cables
2. iCUE LINK LCD AIO Screen Module  9. USB splitter cable
3. QX RGB Fans 10. Tach cable
4. Intel and AMD mounting brackets 11. USB cables
5. Power cable 12. Distribution hub
6. System Hub 13. iCUE LINK active port
7. Intel and AMD mounting hardware 14. USB Type-C port

GETTING TO KNOW QX RGB FANS

AIO_LCD_Getting_To_Know_2
1. iCUE LINK Active Port 2. iCUE LINK Passive Port

GETTING TO KNOW THE SYSTEM HUB

AIO_LCD_Getting_To_Know_3
1. iCUE LINK Active Port 3. USB input
2. Power input 4. Tach output

INTEL INSTALLATION

INCLUDED HARDWARE

Highlighted parts for Intel installation only.

iCUE LINK LCD AIO Screen Module_A

1x iCUE LINK AIO LCD Screen Module

Standoff_Intel_1200_B

4x Intel 1200/1150/1151/1155/1156 standoffs
ELITE Series Intel Retention Kit

Standoff_Intel_1700_C

4x Intel 1700 standoffs
ELITE Series Intel Retention Kit

Backplate_Intel_D

1x Intel backplate
(1700/1200/115x only)
ELITE Series Intel Retention Kit

Mounting_Bracket_Intel_E

1x Intel mounting plate
(pre-installed)
ELITE Series Intel Retention Kit

Thumb_Nut_F

4x Thumb nuts
ELITE Series Intel Retention Kit

Standoff_AMD4_AMD5_GRAY_G

4x AMD AM5/AM4 standoffs
ELITE Series AM5/AM4 Retention Kit

Mounting_Brcket_AMD_AM5_AM4_GRAY_H

4x AMD AM5/AM4
mounting bracket
ELITE Series AM5/AM4 Retention Kit

Screw_Fan_Long_I

16x Long fan screws (H100i)
24x Long fan screws (H150i/H170i)
AIO Cooler Fan Mounting Hardware Kit

Screw_Radiator_J

8x Radiator screws (H100i)
12x Radiator screws (H150i/H170i)
AIO Cooler Fan Mounting Hardware Kit

Washer_K

8x Washers (H100i)
12x Washers (H150i/H170i)
AIO Cooler Fan Mounting Hardware Kit

Fan_QX_RGB_L

2x QX RGB fans (H100i)
3x QX RGB fans (H150i/H170i)
iCUE LINK QX120 RGB 120mm PWM PC Fan Expansion Kit

System_Hub_M

1x System Hub
iCUE LINK System Hub

Cable_Power_Adapter_N

1x PCIe power cable

Cable_Tach_P

1x Tach cable

Cables_2x_USB_O

1x USB 2.0 Type-C cable
1x Micro USB 2.0 cable

Cables_iCUE_LINK_3x_Q

1x iCUE LINK Cable 90° 600mm

2x iCUE LINK Cable 90° 135 mm

Cable_USB_Splitter_R

1x USB splitter cable


1. INSTALL THE BACKPLATE

Adjust backplate (D) for your required socket.

Intel_Backplate_Installation_D

2. INSTALL THE INTEL STANDOFF SCREWS

Attach provided Intel standoff for your socket. Use (B) for LGA 1200 / 115X, (C) for LGA 1700. Tighten all four standoff screws until firmly secured.

Intel_Standoffs_B_C

3. INSTALL THE RADIATOR

Install the radiator inside the case with the short screws (J) and washers (K) as shown.

Radiator_Installation_J_K

4. INSTALL THE PUMP UNIT

Align the bracket and pump over the standoff screws as shown. Attach the thumb nuts (F) to the standoff screws as shown. Tighten the thumb nuts until all four corners are firmly secured.

Intel_Pump_Unit_Installation_F

Continue to the System Hub Installation


AMD AM5 INSTALLATION

INCLUDED HARDWARE

Highlighted parts for AMD AM5/AM4 installation only

iCUE LINK LCD AIO Screen Module_A

1x iCUE LINK LCD AIO Screen Module

Standoff_Intel_1200_Gray_B

4x Intel 1200/1150/1151/1155/1156 standoffs
ELITE Series Intel Retention Kit

Standoff_Intel_1700__GRAY_C

4x Intel 1700 standoffs
ELITE Series Intel Retention Kit

Backplate_Intel_Gray_D

1x Intel backplate
(1700/1200/115x only)
ELITE Series Intel Retention Kit

Mounting_Bracket_Intel_Gray_E

1x Intel mounting plate
(pre-installed)
ELITE Series Intel Retention Kit

Thumb_Nut_F

4x Thumb nuts
ELITE Series Intel Retention Kit

Standoff_AMD4_AMD5_G

4x AMD AM5/AM4 standoffs
ELITE Series AM5/AM4 Retention Kit

Mounting_Brcket_AMD_AM5_AM4_H

4x AMD AM5/AM4
mounting bracket
ELITE Series AM5/AM4 Retention Kit

Screw_Fan_Long_I

16x Long fan screws (H100i)
24x Long fan screws (H150i/H170i)
AIO Cooler Fan Mounting Hardware Kit

Screw_Radiator_J

8x Radiator screws (H100i)
12x Radiator screws (H150i/H170i)
AIO Cooler Fan Mounting Hardware Kit

Washer_K

8x Washers (H100i)
12x Washers (H150i/H170i)
AIO Cooler Fan Mounting Hardware Kit

Fan_QX_RGB_L

2x QX RGB fans (H100i)
3x QX RGB fans (H150i/H170i)
iCUE LINK QX120 RGB 120mm PWM PC Fan Expansion Kit

System_Hub_M

1x System Hub
iCUE LINK System Hub

Cable_Power_Adapter_N

1x PCIe power cable

Cable_Tach_P

1x Tach cable

Cables_2x_USB_O

1x USB 2.0 Type-C cable
1x Micro USB 2.0 cable

Cables_iCUE_LINK_3x_Q

1x iCUE LINK Cable 90° 600mm

2x iCUE LINK Cable 90° 135 mm

Cable_USB_Splitter_R

R. 1x USB splitter cable


1. INSTALL THE AMD AM5/AM4 MOUNTING BRACKET

Remove the integrated Intel mounting bracket (Figure 1). Install the AMD AM5/AM4 bracket by pushing both sides into the slot on the pump until secure (Figure 2).

NOTE: It is important that the AMD AM5/AM4 retention bracket be evenly secured on all sides before installation.
AMD_Bracket_Installation_E_H

2. PREPARE THE MOTHERBOARD FOR INSTALLATION

Remove the existing AMD AM5/AM4 mounting brackets shown.

AMD_Prepare_Motherboard_Installation-01

3. INSTALL THE AMD AM5/AM4 STANDOFF SCREWS

Attach the provided AM5/AM4 standoffs to the CPU socket. Tighten all four standoff screws until firmly secure.

AMD_Standoffs_G

4. INSTALL THE RADIATOR

Install the radiator inside the case with the short screws (J) and washers (K) as shown.

Radiator_Installation_J_K

5. INSTALL THE PUMP UNIT

Align the bracket with the AMD AM5/AM4 standoffs as shown. Tighten the thumb nuts (F) until secure.

AMD_Pump_Unit_Installation_F

SYSTEM HUB INSTALLATION

iCUE_LINK_Connection_1
iCUE_LINK_Connection_2

Connect the 135mm iCUE LINK cable with 90° connectors (Q) to the QX RGB fan and distribution hub. Connect the 600mm iCUE LINK cable (Q) and Type-C USB cable (P) into the distribution hub.

Connect the other end of the 600mm iCUE LINK cable (Q) into an available port in the System Hub (M).

2. CONNECT SYSTEM HUB TO USB AND POWER

iCUE_LINK_Connection_3
iCUE_LINK_Connection_4

Connect the 6-pin micro-fit connector (N) into the System Hub (M).

Connect the 6-pin PCIe connector (N) into a dedicated PCIe power cable from the power supply.

iCUE_LINK_Connection_5
iCUE_LINK_Connection_6

Connect the micro USB cable (P) into the System Hub (M).

Connect the 9-pin USB cables from the System Hub and iCUE LINK LCD AIO (P, Q) into the USB splitter cable (R) then plug the splitter cable into a USB 2.0 header on the motherboard.

iCUE_LINK_Connection_7
iCUE_LINK_Connection_8

Connect the 2-pin, 1-wire tach cable (O) into the System Hub (M).

Connect the 3-pin, 1-wire tach cable (O) into CPU_FAN header on the motherboard.

2. MOUNT THE SYSTEM HUB

Mount the System Hub inside the case magnetically or with the supplied tape.


FAQ

How do I know the direction of the airflow of the fan?

FAQ_image-01_1

An arrow located on the side of the fan indicates the direction of airflow.



Can I reuse the pre-applied thermal paste on the cooler for re-installation?

Re-installation of the cooler will require you to clean off the pre-applied thermal paste and apply a new layer of thermal paste. Visit us at CORSAIR.com to choose one of our performance thermal pastes.



What orientation should I install my radiator?

FAQ_image-02_2


For optimal performance, we recommend installing the radiator with the tubes positioned at the bottom of the case (Figure 1). However, you have the flexibility to install the radiator in various orientations, including an inverted position. Please ensure that the highest point of the radiator is elevated above the level of the CPU pump, regardless of the installation orientation (Figure 2).



My cooler and fans are blinking red or not functioning. What do I do?

If the fans on your system are blinking red, this is an indication that too many iCUE LINK devices are connected to a single port on the System Hub. The maximum number of devices that can be connected to a single port is 7. To resolve this issue, please distribute the iCUE LINK devices across both available ports on the System Hub. This will ensure adequate power distribution to all connected devices.


If you continue to experience issues or find that the fans are not functioning at all, please perform the following:

  • Double check all connections between the cooler and fans.
  • Ensure that the cooler is updated to the most recent firmware via iCUE.

If this does not resolve your problems, please open a support ticket or contact our customer support team for further troubleshooting and assistance at https://help.corsair.com/hc/requests/new.




WARRANTY

Warranty_6

All CORSAIR iCUE LINK coolers have a 6-year warranty.


LEGAL

© 2023 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.


POWER RATING

System Hub Output rating: 12Vdc 7A (per port)

QX RGB Input rating: 12Vdc 1.02A

QX RGB Output rating: 12Vdc 0.2A (no load)