GUIA DE INÍCIO RÁPIDO

iCUE H60x | H100x RGB ELITE

ALL-IN-ONE LIQUID CPU COOLER

Hoth_Main_visual
NOTE: Most newer PC cases include a CPU cut-out to allow access to the bottom of the motherboard. If your case does not include a cut-out, you will need to remove your motherboard from the case prior to installation. ELITE Series coolers come with the Intel mounting bracket pre-installed on the pump for quick installation.

INTEL INSTALLATION

INCLUDED HARDWARE

Highlighted parts for Intel installation only.

RGB_AIO_Intel_1200_Stadoffs_A

4x Intel 1200/1156/1155/1151/1150 standoffs

Hoth_Intel_Standoff_2066_B

4x Intel 2066/2011-3/2011 standoffs

Standoff_Intel_1700_C

4x Intel 1700 standoffs

Backplate_Intel_D

1x Intel backplate
(1200/115X/1700 only)

Mounting_Bracket_Intel_E

1x Intel mounting bracket
(pre-installed)

Thumb_Nut_F

4x Thumbnuts

Standoff_AMD4_AMD5_GRAY_G

4x AMD AM5/AM4 standoffs

Mounting_Brcket_AMD_AM5_AM4_GRAY_H

1x AMD AM5/AM4 mounting bracket

Hoth_ARGB_Harness_I

1x ARGB cable

Hoth_Splitter_Cable_J

1x Fan splitter cable

Hoth_Screw_Rad_Long_K

4x Long fan screws (H60x)
8x Long fan screws (H100x)

Hoth_Screw_Rad_Short_L

4x Short radiator screws (H60x)
8x Short radiator screws (H100x)

Hoth_Washers_M

8x Washers

Hoth_FanSP120_N

1x SP120 RGB ELITE fan (H60x)
2x SP120 RGB ELITE fan (H100x)


1. INSTALL THE BACKPLATE

  • Adjust backplate for your required socket.
NOTE: Intel LGA 2066/2011-3/2011 do not require backplate installation. Proceed to step 2.
Hoth_Backplate_Installation

2. INSTALL THE INTEL STANDOFF SCREWS

  • Attach the provided Intel standoff for your socket.
  • Use (A) for LGA 1200/115X, (B) for LGA 2011/2011-3/2066 or (C) for LGA 1700.
  • Tighten all four standoffs until firmly secured.
Hoth_Intel_Standoffs

3. INSTALL THE FANS AND RADIATOR

  • Attach the radiator and the fans as shown. For the best cooling performance, we recommend mounting the fans as an air-intake to your PC case.
Hoth_Radiator_Mounting

4. INSTALL THE PUMP UNIT

  • Align the bracket and pump over the standoff screws as shown.
  • Attach the thumb nuts (F) to the standoff screws as shown.
  • Tighten the thumb nuts until all four corners are firmly secured.
Hoth_Pump_Installation

Please click here to continue with installation.


AMD INSTALLATION

INCLUDED HARDWARE

Highlighted parts for AMD installation only.

RGB_AIO_Intel_1200_Stadoffs_GRAY_A

4x Intel 1200/1156/1155/1151/1150 standoffs

Hoth_Intel_Stan_2066_Gray_B

4x Intel 2066/2011-3/2011 standoffs

Standoff_Intel_1700__GRAY_C

4x Intel 1700 standoffs

Backplate_Intel_Gray_D

1x Intel backplate
(1200/115X/1700 only)

Mounting_Bracket_Intel_Gray_E

1x Intel mounting bracket
(pre-installed)

Thumb_Nut_F

4x Thumbnuts

Standoff_AMD4_AMD5_G

4x AMD AM5/AM4 standoffs

Mounting_Brcket_AMD_AM5_AM4_H

1x AMD AM5/AM4 mounting bracket

Hoth_ARGB_Harness_I

1x ARGB cable

Hoth_Splitter_Cable_J

1x Fan splitter cable

Hoth_Screw_Rad_Long_K

4x Long fan screws (H60x)
8x Long fan screws (H100x)

Hoth_Screw_Rad_Short_L

4x Short radiator screws (H60x)
8x Short radiator screws (H100x)

Hoth_Washers_M

8x Washers

Hoth_FanSP120_N

1x SP120 RGB ELITE fan (H60x)
2x SP120 RGB ELITE fan (H100x)


1. INSTALL THE AMD AM5/AM4 MOUNTING BRACKET

  • Remove the integrated Intel mounting bracket (Figure 1).
  • Install the AMD AM5/AM4 bracket by pushing both sides into the slot on the pump until secure (Figure 2).
NOTE: It is important that the AMD AM5/AM4 retention bracket be evenly secured on all sides before installation.
Hoth_AMD_Bracket

2. INSTALL THE FANS AND RADIATOR

  • Attach the radiator and the fans as shown. For the best cooling performance, we recommend mounting the fans as an air-intake to your PC case.
Hoth_Radiator_Mounting

3. PREPARE THE MOTHERBOARD FOR INSTALLATION

  • Remove the existing AMD AM5/AM4 mounting brackets shown.
Hoth_Prepare_MOBO

4. INSTALL THE AMD AM5/AM4 STANDOFF SCREWS

  • Attach the provided AMD AM5/AM4 standoffs to the CPU socket.
  • Tighten all four screws until firmly secure.
Hoth_AMD_Standoffs

5. INSTALL THE PUMP UNIT

  • Align the bracket with the AMD AM5/AM4 standoffs as shown. Tighten the thumb nuts (F) until secure.
Hoth_Pump_Inst_AMD

CONNECTING THE PUMP AND FANS

1. CONNECT THE PUMP AND FANS TO THE MOTHERBOARD

  • Connect pump tach cable to the CPU_FAN header on your motherboard (Figure 1).
  • Connect each fan to the Fan splitter cable (J) (Figure 2) then plug the Fan splitter cable into a 4-pin header on your motherboard .
Hoth_Connecting_MOBO

2. CONNECT THE PUMP AND FANS TO ARGB

  • Connect the pump and fans into the ARGB cable (I). For best lighting playback, connect the pump into connector #1 and the fan(s) on connector #2 and #3. Plug the ARGB cable into the ARGB header on a compatible motherboard.
NOTE: The pump and fan LEDs get power from the motherboard or control device. If they are not connected, they will not illuminate.
Hoth_ARGB_Connection
  • Alternatively, for the full iCUE experience, connect the 4-pin fan and 4-pin RGB headers into the “Fans” (2) and “RGB HUB” (1) headers on an iCUE controller such as the iCUE COMMANDER CORE XT (sold separately).
Hoth_Commander_Connection

iCUE SETUP VIDEO TUTORIAL


FAQ

How do I know the direction of the airflow of the fan?

FAQ1_IMG

An arrow located on the side of the fan indicates the direction of airflow.



Can I reuse the pre-applied thermal paste on the cooler for re-installation?

Re-installation of the cooler will require you to clean off the pre-applied thermal paste and apply a new layer of thermal paste. Visit us at CORSAIR.com to choose one of our performance thermal pastes.



What orientation should I install my radiator?

Hoth_FAQ2

The best way to install a radiator is with the tubes on the bottom of the case, though you can install it with the tubes in any position, including an inverted radiator, as long as the highest point in the radiator is visibly higher than the CPU pump.



My cooler and fans are blinking red or not functioning. What do I do?

Please double check all connections between the cooler and fans. Ensure that the cooler is updated to the most recent firmware via iCUE. If this does not resolve your problems, please open a support ticket at support.corsair.com or contact our customer support team for further troubleshooting and assistance.

https://help.corsair.com/hc/requests/new



What should I do if my cooler backplate feels loose after installation?

It is common for your cooler backplate to feel loose after you install it into your motherboard for the first time. Once you have seated and tightened down the cooler pump, it will pull the backplate to the motherboard and apply pressure on the socket via the cooler.

IMPORTANT: Do NOT, under any circumstances, add additional washers and spacers to your backplate to decrease play in the backplate. Doing so will increase the mounting pressure to the retention kit and potentially damage your retention kit, motherboard, or socket.



What should I do if I lost or broke a specific part or accessory from the iCUE H60X | H100X RGB ELITE liquid CPU cooler kit?

Replacement parts for iCUE H60X | H100X RGB ELITE liquid CPU coolers are sold through the CORSAIR webstore.




WARRANTY

Warranty_5

CORSAIR iCUE H60X | H100X RGB ELITE liquid CPU coolers have a 5-year warranty.


LEGAL

© 2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.