HOW TO

Garantissez des performances optimales à votre SSD MP600 M.2

If you are using Windows 10 and your MP600 NVMe M.2 solid state drive is experiencing a drop in performance, there are two methods you can use to improve performance:

  • Use TRIM to optimize your SSD, either with GUI or Powershell
  • Disable Fast Boot

Both methods require you to have administrator access. We recommend that you save all open applications before attempting any of the methods above.

NOTE: We recommend executing the steps one at a time, and that you do not combine operations.

 

Using TRIM (GUI method)

  1. Open Explorer and go to This PC.
  2. Right-click your SSD and select Properties.
  3. Click the Tools tab.
  4. Click Optimize.
    optimize_ssd_via_properties.jpg

  5. Select your SSD and click Optimize.
    ssd_optimization_selection.jpg

  6. Wait for the process to complete, then click Close.
  7. Shut down your PC.
  8. Power on your PC and see if your SSD performance has improved.

 

Using TRIM (Powershell method)

  1. Click the Start button.
  2. Type powershell in the search bar.
  3. Right-click powershell.exe and click Run as administrator.
  4. Type Optimize-Volume -DriveLetter YourDriveLetter -ReTrim -Verbose. Replace YourDriveLetter with the letter of your SSD.
    • The letter of your main storage device is usually C; in such a case, you would type Optimize-Volume -DriveLetter C -ReTrim -Verbose.
      ssd_optimization_via_powershell.jpg

  5. Hit the Enter key and wait for the process to complete.
  6. Shut down your PC.
  7. Power on your PC and see if your SSD performance has improved.

 

Disabling Fast Boot

  1. Click the Start button.
  2. Type Control Panel in the search bar.
  3. Click Hardware and Sound.
    control_panel_-_hardware_and_sound.jpg

  4. Click Change what the power buttons do under "Power Options."
    control_panel_-_change_what_buttons_do.jpg

  5. Click Change settings that are currently unavailable.
  6. Uncheck the Turn on fast startup checkbox.
    control_panel_-_uncheck_turn_on_fast_setup.jpg

  7. Click Save changes.
  8. Shut down your PC.
  9. Power on your PC and see if your SSD performance has improved.

CONTENU CONNEXE