MANUAL | QUICK START GUIDE
CORSAIR XENEON 34WQHD240-C QD-OLED 34-INCH GAMING MONITOR
INTRODUCTION
Product Setup, User Information, and Warranty/Dead Pixel policy can be found at https://qsg.corsair.com/xeneon-monitors
PRECAUTIONS
- Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer.
- Keep the plastic packaging bag for the product in a place that cannot be reached by children.
- Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.
- The power cord plug must be connected to a properly wired and grounded power outlet.
- Do not touch the plug with wet hands, otherwise can easily cause electric shock.
- Place the monitor in a stable and well-ventilated place.
- Do not place the monitor near any heat sources such as electric radiators or direct sunlight.
- The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects.
- Do not use the monitor near water, drinks, or any type of liquids. Failure to do so may result in electric shock or damage to the monitor.
- Make sure to unplug the monitor from the power outlet before cleaning.
- As the screen surface can be easily scratched, avoid touching the surface with any hard or sharp object. Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the Equipment if required. However, never spray the cleaner directly onto the screen.
- Disconnect the power cable if the Equipment is not being used for a long period of time.
- Do not attempt to disassemble or repair the monitor yourself.
- The wall plug is the disconnecting device. The plug must remain readily operable.
- When the product is running or turning off, please do not unplug the power cord.
- If the power cord is unplugged accidentally, horizontal line noise could occur momentarily.
- Please do “Image Retention” if you have the horizontal line noise.
PACKAGE CONTENTS
CORSAIR XENEON 34WQHD240-C QD-OLED DISPLAY CONTENTS
A. CORSAIR XENEON 34WQHD240-C QD-OLED Display Panel
B. Stand Base
C. AC Power Cable
D. DisplayPort Cable (1.5M)
E. HDMI Cable (1.5M)
F. USB-C Cable (1.5M)
G. USB-A to USB-C cable (1.8M)
ASSEMBLY
- Remove the top tape and open the box.
- Take all the accessory parts and the monitor neck and base out.
- Remove the middle paper container layer.
- Combine the stand neck with the screen VESA mount, and when you hear a clicking sound, it indicates that the combination is complete.
- Assembly the stand base and neck.
- Tighten the thumb screw and put the monitor safely and horizontally then finish the assembly process.
TILT, SWIVEL, AND HEIGHT ADJUSTMENT
CORSAIR XENEON 34WQHD240-C QD-OLED features a sturdy and stylish stand that offers swivel adjustment.
- Tilt -7/+15 degrees
- Swivel +/- 30 degrees
- Height 100mm
CONNECTIVITY
BACK SIDE
- HDMI 2.1 – Dual HDMI inputs correspond to “HDMI1” and “HDMI2” inputs
- DisplayPort 1.4 – DisplayPort input corresponds to “DisplayPort” input
- USB Type-C Alt DP – Supports DisplayPort Alt Mode and upstream USB input
- USB Type-C IN – Upstream USB input port. This port or the USB Type-C Port must be connected to a USB-capable port on your host device to support downstream USB 3.0 ports
- USB 3.1 Type-A – 4 USB Type-A 5Gbps USB 3.1 Gen1 ports
- Audio Jack – 3.5mm Audio Jack for headset or powered speaker connection
- AC In – AC Power inputs
- Kensington lock – One security device
BOTTOM SIDE
- OSD Joystick – For Xeneon 34WQHD240-C QD-OLED OSD selection use
- Power On/Off – Power on (off) Xeneon 34WQHD240-C QD-OLED
- Input Source Select – Switch through the inputs from the current input to the next one in this cycle: HDMI1, HDMI2, DP, Type-C DP Alt-Mode
PROXIMITY SENSOR FOR OSD LOCATION INDICATOR
Reach your hand here on the front of the unit and there will be a Button Location Indicator popping up on the screen for user's reference. This indicator activates when movement is detected within 25-50mm of the buttons. The indicator will turn off after 5 seconds.
OPERATIONS
CONTROLS
Your monitor includes a joystick on the front side for opening shortcuts and navigating display settings.
ON-SCREEN DISPLAY (OSD)
By pressing the joystick inward, you can access your monitor’s display settings. You can use the joystick to navigate the settings and pressing the joystick inward will confirm your selection.
OSD - PICTURE
The first menu, labeled “Picture”, contains the following settings for adjusting the overall picture quality.
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 | FUNCTIONALITY |
| Picture | Preset | Standard | Standard | |
| Movie | Selects a display preset optimized for watching movies | |||
| Text | Selects a display preset optimized for reading text | |||
| sRGB | Selects a display preset optimized for HDR content in sRGB color space | |||
| Creative | Selects a display preset factory calibrated for content-creation tasks | |||
| Game | Selects a display preset optimized for playing fast-moving games | |||
| HDR | Selects a display preset that is HDR enabled | |||
| HDR Peak Brightness | The HDR Peak brightness mode is great for HDR content with a peak brightness of 1000nit (within a 3% window) | |||
| Brightness | (0-100) | Adjusts the intensity of the display backlight | ||
| Contrast | (0-100) | Adjusts the display’s contrast | ||
| Sharpness | (0-10) | Adjusts the display’s sharpening filter, increasing edge detail | ||
| Color Temperature |
Cool |
Sets the display’s color temperature to cold, 8500K | ||
| Standard | Sets the display’s color temperature to standard, 6500K | |||
| Warm | Sets the display’s color temperature to warm, 5000K | |||
| Custom | R (0-100) | Allows you to manually set the display’s color temperature with sliders controlling the red, blue, and green levels | ||
| G (0-100) | ||||
| B (0-100) | ||||
| Gamma | 2 | Adjusts the perceived luminance; default is 2.2 | ||
| 2.2 | ||||
| 2.4 | ||||
| Saturation | (0-10) | Adjusts the saturation level; the default is 0 | ||
| Refresh Overlay | OFF | Displays real time refresh rate when enabled | ||
| ON | ||||
| Crosshair | OFF | Enable Crosshair function | ||
| Dot | ||||
| Cross | ||||
| Angle | ||||
| Crosshair Color | Green | Change Crosshair Color | ||
| Red |
OSD - PIP/PBP (PICTURE-IN-PICTURE / PICTURE-BY-PICTURE)
The second menu, labeled “PIP/PBP”, lets you enable the PIP/PBP functions and display different ways.
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 | FUNCTIONALITY |
| PIP/PBP | Function Mode | OFF | Enable PIP or PBP function | |
| PIP | ||||
| PBP | ||||
| PIP Position | Top Left | Place sub input source at top left side | ||
| Top Right | Place sub input source at top right side | |||
| Bottom Left | Place sub input source at bottom left side | |||
| Bottom Right | Place sub input source at bottom right side | |||
| Sub Input Source | HDMI 1 | Select sub input source | ||
| HDMI 2 | ||||
| Display Port | ||||
| Type C | ||||
| Swap Video Source | Swaps video source between main picture and sub picture | |||
| Switch Audio Source | Main Source | Change audio source between main source and sub source | ||
| Sub Source |
OSD - OSD SETTING
The third menu, labeled “OSD Setting”, contains the following settings for adjusting the display’s internal settings.
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 | FUNCTIONALITY |
| OSD Setting | Language | 繁體中文 | Selects the OSD’s language | |
| English | ||||
| Français | ||||
| Deutsch | ||||
| Italiano | ||||
| 日本語 | ||||
| 한국어 | ||||
| Português | ||||
| Español | ||||
| Transparency | OFF | Sets the OSD to be transparent or opaque | ||
| ON | ||||
| Time Out | (10-60) | Adjusts how long (in seconds) the OSD stays on screen before disappearing |
OSD - SYSTEM SETTINGS
The fourth menu, labeled “System Setting”, lets you make adjustments to the system settings.
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 | FUNCTIONALITY |
| System Setting | Aspect Ratio | Auto | Aspect ratio is the ratio of width to height of an image or screen. When the aspect ratio is set to Auto, the monitor will adapt the aspect ratio to match the incoming video signal. This mode is useful when trying to view an image with a different aspect ratio than the display without distorting the image. Full mode will take the input and change the size of the image to fit the screen. | |
| Full | ||||
| Adaptive Sync | OFF |
Enables AMD FreeSync or NVIDIA G-SYNC to reduce screen tearing and stuttering by synchronizing the monitor’s refresh rate with the framerate from the GPU. When enabled, you will be able to select AMD FreeSync or NVIDIA G-SYNC within the Graphics Driver.
May require a system reboot to access NVIDIA settings |
||
| ON | ||||
| Triple Monitor Enable | OFF |
For users needing to use triple monitors via two DisplayPort and one HDMI port, enabling this special mode is recommended. This mode should adjust settings for optimal performance and display quality for the three-monitor use case. If the triple monitor condition no longer exists, please switch back to “OFF” to ensure the best performance. |
||
| ON | ||||
| Proximity Sensor | OFF | The proximity sensor switch is initially ON. Users can toggle it OFF to address specific scenarios where the sensor could be unexpectedly activated, accommodating unique use cases. | ||
| ON | ||||
| Source Detection | Auto | Allows the user to choose whether the monitor should automatically detect a video source or allows the user to manually select the video source. Auto should be selected when there is only one video input device, and Manual should be selected when a specific video input is desired, but there are multiple video inputs. | ||
| Manual | ||||
| USB-C Alt Mode | 4 Lane |
Allows the user to choose between USB data transfer speeds but can affect the refresh rate of the monitor.
|
||
| 2 Lane | ||||
| Factory Reset | OFF | When applied, Factory Reset returns the monitor to its default factory settings. All settings previously applied will be reset to the default settings. | ||
| ON |
OSD - SCREEN LIFE MANAGEMENT
The fifth menu, labeled “Screen Life Management”, lets you efficiently manage screen life.
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 | FUNCTIONALITY |
| Screen Life Management | Image Retention | Start Refresh |
Refreshes the pixels to prevent image retention or “burn-in”. If the display is left on for 8 hours, an overlay notification will appear on the screen suggesting that Image Retention Refresh be performed. While the display is being refreshed, the monitor cannot be used. When the monitor is powered off, Image Retention Refresh will be running automatically if it has been operated for more than 8 hours. Hitting the power button during a refresh will cancel the process and will allow the display to be used. To ensure the monitor’s longevity, it is recommended to power the monitor off when not in use and utilize the Image Retention Refresh during long periods of continued use. After image retention, the monitor will automatically switch to power-off mode. Please power on the monitor once the LED indicator stops alternating between white and amber flashes. *Note: The Image Retention process will take approximately 6 minutes. |
|
| Orbit | OFF | While activated, the image shifts 1 pixel per minute in a circular pattern to prevent screen damage and image retention. To ensure monitor longevity, it’s recommended to always keep the Orbit setting on, especially when using the monitor for productivity and work uses or still images. | ||
| ON | ||||
| Brightness Stabilizer | OFF | Limits the peak brightness of the monitor to 250 nits while providing more stable brightness levels when switching between windows and applications. To take advantage of the full brightness and contrast capabilities provided by this monitor set Brightness Stabilizer to OFF; ideal for HDR, gaming and media consumption. To ensure stable brightness settings for productivity tasks, set Brightness Stabilizer to ON. | ||
| ON |
OSD - AUDIO
The sixth menu, labeled “Audio”, lets you control the display’s audio.
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 | FUNCTIONALITY |
| Audio | Volume | (0-100) | Adjusts the volume of the audio output from the headphone jack |
OSD - INPUT SOURCE
The seventh menu, labeled “Input Source”, lets you switch between the display’s different inputs.
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 | FUNCTIONALITY |
| Input Source | HDMI 1 | Switches to the device connected to the HDMI-1 port | ||
| HDMI 2 | Switches to the device connected to the HDMI-2 port | |||
| DisplayPort | Switches to the device connected to the “DP” DisplayPort port | |||
| Type-C | Switches to the device connected to the TYPE-C port |
OSD - INFORMATION
The eighth menu, labeled “Information”, provides you monitor information.
| LEVEL 1 | LEVEL 2 | LEVEL 3 | LEVEL 4 | FUNCTIONALITY |
| Information | Source | Display the current input source | ||
| Resolution | Display the current display resolution | |||
| Refresh Overlay | Display the current refresh rate | |||
| Adaptive Sync | Adaptive Sync Status | |||
| HDR | HDR status | |||
| FW Version | Shows the current FW Version |
APPENDIX
TABLE 1: TECHNICAL SPECIFICATIONS
| Product Name |
CORSAIR XENEON 34WQHD240-C QD-OLED
|
| Part Number | CM-9030005 |
| Device | RDD0027 |
| USB Hub ID | CORSAIR USB 3.1 Hub |
| Panel Size | 34” Diagonal |
| Display Surface | Non-Glare |
| Pixels per inch | 110 |
| Aspect Ratio | 21:9 |
| Native Resolution | 3440 x 1440 @ 240Hz |
| Response Time (GtG) | 0.03ms |
| Display Colors | 1.07B colors (10bit RGB) |
| Panel Technology | QD-OLED |
| Flicker-Free | Yes |
| Viewing Angles | 178° (H) / 178° (V) |
| Peak Brightness |
1000 cd/m2 (APL 3%) 450 cd/m2 (APL 10%) 250 cd/m2 (APL 100%) |
| Static Contrast Ratio | 1,500,000:1 |
| HDR Certification | DisplayHDR True Black 400 |
| Color Gamut (CIE 1976) | 99% (DCI-P3), 100% (sRGB) |
| Variable Refresh Rate |
NVIDIA G-Sync Compatible Certified AMD FreeSync Premium |
| HDMI Input | 2x HDMI 2.1 |
| DisplayPort Input | 1x DisplayPort 1.4 |
| USB-C Input | 1x DisplayPort 1.4 (USB-C Alt Mode), 65W Power Delivery, USB 5Gbps Data Upstream |
| USB-C Upstream Input | 1x 5Gbps USB-C with 15W Power Delivery |
| USB-A Output | 4x 5Gbps Type-A USB Type-A 3.1 gen1 |
| 3.5mm Audio | Yes, passthrough from video input |
| Power Consumption (On) | 251W |
| Power Consumption (Sleep) | <0.5W |
| Power Consumption (Off) | <0.3W |
| VESA Compatibility | 100mm x 100mm |
| Dimensions (W x H x D) |
With Stand: 812.04mm x 544.12mm x 281.43mm
|
| Weight |
With Stand: 10Kg
|
| Stand Tilt | -7/+15 degrees |
| Swivel | +/- 30 degrees |
| Height Adjust Range | 100mm |
| AC In | 100-240Vac, 50/60Hz |
| Note: your device uses the following power supply: Guangzhou Shikun Electronic Technology PW.M251W1.601 |
TABLE 2: SUPPORTED DISPLAY MODES
| Resolution | Refresh Rate | HDMI | DP/Type-C | PIP/PBP (HDMI) | PIP/PBP (DP/Type-C) | |
| 640x480 | VGA | 60Hz | V | V | V | V |
| 67Hz | V | V | ||||
| 720x400 | Dos-Mode | 70Hz | V | V | ||
| 800x600 | SVGA | 56Hz | V | V | ||
| 60Hz | V | V | V | V | ||
| 72Hz | V | V | ||||
| 75Hz | V | V | ||||
| 1024x768 | XGA | 60Hz | V | V | V | V |
| 75Hz | V | V | ||||
| 1152x864 | XGA+ | 75Hz | V | V | ||
| 1280x720 | WXGA | 60Hz | V | V | V | V |
| 1280x800 | WXGA | 60Hz | V | V | V | V |
| 1280x960 | WXGA | 60Hz | V | V | V | V |
| 1280x1024 | SXGA | 60Hz | V | V | V | V |
| 75Hz | V | V | ||||
| 1440x900 | WXGA+ | 60Hz | V | V | V | V |
| 1680x1050 | WSXGA+ | 60Hz | V | V | V | V |
| 1720x1440 | 60Hz | V | V | |||
| 1920x1080 | FHD | 60Hz | V | V | ||
| 120Hz | ||||||
| 240Hz | V | V | ||||
| 2560x1440 | QHD | 50Hz | ||||
| 60Hz | V | V | V | V | ||
| 75Hz | ||||||
| 120Hz | V | V | ||||
| 240Hz | V | V | ||||
| 3440x1440 | WQHD | 30Hz | V | V | V | V |
| 60Hz | V | V | V | V | ||
| 120Hz | V | V | ||||
| 240Hz | V | V | ||||
| 480P | 640x480p @ 60 Hz 4:3 | V | V | V | V | |
| 720x480p @ 60 Hz 16:9 | V | V | V | V | ||
| 576P | 720x576p @ 50 Hz 16:9 | V | V | |||
| 720P | 1280x720p @ 50 Hz 16:9 | V | V | |||
| 1280x720p @ 60 Hz 16:9 | V | V | V | V | ||
| 1280x720p @ 120 Hz 16:9 | V | V | ||||
| 1080P | 1920x1080p @ 25 Hz 16:9 | |||||
| 1920x1080p @ 30 Hz 16:9 | ||||||
| 1920x1080p @ 50 Hz 16:9 | V | V | ||||
| 1920x1080p @ 60 Hz 16:9 | V | V | V | V | ||
| 1920x1080p @ 100 Hz 16:9 | V | V | ||||
| 1920x1080p @ 120 Hz 16:9 | V | V | ||||
| 2160P | 3840x2160p @ 24 Hz 16:9 | |||||
| 3840x2160p @ 25 Hz 16:9 | ||||||
| 3840x2160p @ 30 Hz 16:9 | ||||||
| 3840x2160p @ 50 Hz 16:9 | V | |||||
| 3840x2160p @ 60 Hz 16:9 | V | V | V | |||
| 3840x2160p @ 100 Hz 16:9 | V | |||||
| 3840x2160p @ 120 Hz 16:9 | V | |||||
*Please note, the timing table may vary depending on the hardware configuration.
ABOUT LOW BLUE LIGHT & FLICKER FREE
- The monitor should be 50 ~ 70 cm (20 ~ 28 inches) away from your eyes.
- Looking at the screen for an extended period of time causes eye fatigue and may deteriorate your eyesight.
- Rest your eyes for 5 ~ 10 minutes for every 1 hour of product use.
- Reduce your eye strain by focusing on objects far away.
- Frequent blinking and eye exercise help keep your eyes from drying out.
** The Monitor uses a low blue light panel and compliance with TÜV Rheinland Low Blue Light Hardware Solution at factory reset/default setting mode (Ex: Brightness 75%, Contrast: 50%, CCT: Normal, Preset mode: Standard.)
HDMI LEGAL DISCLOSURE
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
