MANUAL | QUICK START GUIDE

CORSAIR LS350/LS430 AURORA

RGB LIGHT STRIPS

LS_Aurora_Strips_Main_Visual

GETTING TO KNOW YOUR LS AURORA RGB LIGHT STRIPS

350mm Kit

LS_Aurora_GettingToKnow

A. Two (2) 350mm LS Aurora RGB Light Strips

B. Two (2) CORSAIR 3-pin RGB Extension Cables

C. One (1) +5V ARGB-to-CORSAIR 3-pin Adapter

430mm Kit

LS_Aurora_GettingToKnow

A. Two (2) 430mm LS Aurora RGB Light Strips

B. Two (2) CORSAIR 3-pin RGB Extension Cables

C. One (1) +5V ARGB-to-CORSAIR 3-pin Adapter

1. LS AURORA RGB LIGHT STRIPS

LS_Aurora_Strips_GettingToKnow
D. Male CORSAIR 3-pin RGB Connector E. Female CORSAIR 3-pin RGB Connector

2. +5V ARGB ADAPTER CABLE

LS_Aurora_ARGB_GettingToKnow
F. Female CORSAIR 3-Pin RGB Connector G. +5V ARGB Connector

INSTALLATION

BEFORE YOU START

Alert_Orange_Uncropped
Turn the computer off prior to the installation of the LS Aurora RGB Light Strips.
Alert_Orange_Uncropped
The LS Aurora RGB Light Strips cannot be bent at sharp angles due to the design of the internal circuitry, doing so will damage the light strips.

1. CREATE A LIGHT STRIP CHAIN

  • Connect LS Aurora RGB Light Strips (A) by inserting the Male CORSAIR 3-pin RGB connector (D) of a light strip into the Female CORSAIR 3-pin RGB connector (E) of another light strip.
LS_Aurora_Connection12

2. MOUNT LS AURORA RGB LIGHT STRIPS

  • The LS Aurora RGB Light Strips (A) can be magnetically mounted on a steel chassis or adhered to a surface with the supplied mounting tape.
LS_Aurora_Mounting

3. CONNECT LIGHT STRIPS TO A +5V ARGB ADAPTER CABLE

  • Insert the Male CORSAIR 3-pin RGB connector (D) of the LS Aurora RGB Light Strip into the Female CORSAIR 3-pin RGB connector (F) on the CORSAIR 3-pin RGB to +5V ARGB adapter cable (C).

Two CORSAIR 3-pin RGB extension cables (E) are included if additional length is required.

+5V_ARGB_Connection3

4. CONNECT ADAPTER CABLE TO A +5V ARGB HEADER

  • Connect the +5V ARGB connector (G) from the CORSAIR 3-pin RGB to +5V ARGB adapter cable (C) to the +5V ARGB header on your motherboard or lighting controller.
ARGB_Motherboard_Connection

5. CONFIGURE LIGHTING

Lighting is configured and managed by the device to which the +5V ARGB adapter cable is connected. In most situations this is typically the motherboard via a +5V ARGB header, which would require entering the BIOS to configure the lighting effects. Please refer to your motherboard manual for additional details.


FAQ

Can I use the LS Aurora RGB Light Strips with CORSAIR Lighting Controllers?


The LS Aurora RGB Light Strips can be used as an expansion to the iCUE LINK LS Aurora RGB Light Strip kit or used with other CORSAIR lighting controllers such as the Commander PRO / Commander PRO XT / Lighting Node PRO.




WARRANTY

Warranty_2

The CORSAIR LS350/LS430 Aurora RGB Strips have a 2-year warranty.


LEGAL

©2024 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.