HOW TO

How to upgrade the Lenovo Legion Go SSD with the CORSAIR MP600 MICRO

The CORSAIR MP600 MICRO provides great storage performance in a compact package, making it ideal for systems that utilize the M.2 2242 form factor. Systems like the Lenovo Legion Go.

Installing the MP600 MICRO in the Lenovo Legion Go

frame_86715

Before you install your new SSD, make sure that you’ve completely powered off the system and removed any microSD cards you may have installed.

frame_86840
frame_86926

Remove both controllers from the Legion Go, lay the system face down on a soft surface, and proceed to carefully remove the six small screws holding the back panel.

frame_87074

Use a plastic prying tool to remove the backplate, starting at the notch under the system’s kickstand. Work the prying tool around the edges to release all the internal plastic clips holding the backplate.

frame_87371

Once the backplate has been released from the system, set it aside. Then lift the sticker holding the battery connector in place and gently remove the connector from the socket.

frame_87549

The M.2 SSD socket is located on the right, just underneath a protective sticker. Peel this sticker back and carefully remove the screw securing the original SSD in place.

You’ll want to be extra careful here in order to avoid stripping the M.2 screw.

frame_87781

Once you’ve removed the original SSD, carefully unwrap the shielding and set it aside, we’ll want to re-use this for our MP600 MICRO.

Preparing the OS

frame_87900

We can either clone the original SSD to the MP600 MICRO using a USB M.2 adapter and cloning software or create bootable restore media with a spare USB drive and a recovery image downloaded directly from Lenovo.

Re-assembly

frame_88201
frame_88373

Once you’ve either cloned the original SSD or prepared restoration media, wrap the MP600 MICRO with the shielding and install it into the M.2 2242 socket, secure it in place with the screw, be careful not to overtighten or else you may strip the screw.

frame_88592

Reconnect the battery cable, replace any stickers that were peeled up during disassembly, and resecure the back cover back onto the Legion Go.

frame_88727

We can now re-attach the controllers and boot up the system.

frame_88910

If you’ve cloned the drive, it should boot right back up to Windows. If you opted to create restoration media, follow the steps from Lenovo to install the operating system onto the SSD.

If you created restoration media, you may need to install further updates to the Legion Go before installing your favorite apps and games.

frame_89148

PRODUCTS IN ARTICLE

CONTEÚDO RELACIONADO