CORSAIR XENEON FLEX 45WQHD240 OLED 45-INCH GAMING MONITOR

Product Setup, User Information, and Warranty/Dead Pixel policy can be found at https://qsg.corsair.com/xeneon-monitors

• Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer.
• Keep the plastic packaging bag for the product in a place that cannot be reached by children.
• Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.
• The power cord plug must be connected to a properly wired and grounded power outlet.
• Do not touch the plug with wet hands, otherwise can easily cause electric shock.
• Place the monitor in a stable and well-ventilated place.
• Do not place the monitor near any heat sources such as electric radiators or direct sunlight.
• The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects.
• Do not use the monitor near water, drinks, or any type of liquids. Failure to do so may result in electric shock or damage to the monitor.
• Make sure to unplug the monitor from the power outlet before cleaning.
• As the screen surface can be easily scratched, avoid touching the surface with any hard or sharp object. Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the equipment if required. However, never spray the cleaner directly onto the screen.
• Disconnect the power cable if the equipment is not being used for a long period of time.
• Do not attempt to disassemble or repair the monitor yourself.
• Please remove the protective film on the back side of the product before use.
• When the product is running or turning off, please do not unplug the power adapter.
  • If the adapter is unplugged accidentally, horizontal line noise could occur momentarily.
  • Please do “Image Retention Refresh” if you have the horizontal line noise.
    (OSD/System Setting/Image Retention Refresh)

A. CORSAIR XENEON FLEX 45WQHD240 OLED Display Panel
B. Stand Base
C. AC Adapter
D. AC Power Cable
E. DisplayPort Cable (1.5M)
F. HDMI Cable (1.5M)
G. USB-C Cable (1.5M)
H. USB-A to USB-C cable (1.8M)

1. Remove the top tape and open the box.
2. Take the monitor base stand accessories out.
3. Take the top EPS layer and protection EPS plate out.
4. Remove the 4 buckles and the outer carton.
5. Slowly take the monitor from the packaging.
6. Attach the neck and monitor base by fastening the screws. Put the monitor horizontally and finish the assembly.

Your CORSAIR XENEON FLEX 45WQHD240 OLED monitor can be bent between FLAT and 800R curvature using the side handles found on either side of the monitor. The side handles can be extended by pressing the button on each handle and pulling the handles out until they lock in place with a click.

Grab the handles with each hand being careful not to put your thumbs or hand on the OLED panel.

Bend the panel toward you with a slow, smooth motion. The bending mechanism clicks when reaching full bend range (~800R) and also when bending back to FLAT.

Your CORSAIR XENEON FLEX 45WQHD240 OLED monitor features a sturdy and stylish stand that offers tilt adjustment. You can use the front center, bottom handle to tilt the panel. Depending on your desk surface, you may find it helps to apply pressure to the base or one of the side handles to keep the display from sliding while tilting.

• Tilt -7 / + 15 degrees

Your monitor includes a joystick on the front side for opening shortcuts and navigating display settings.

By pressing the joystick inward, you can access your monitor’s display settings. You can use the joystick to navigate the settings and pressing the joystick inward will confirm your selection.

The first menu, labeled “Picture”, contains the following settings for adjusting the overall picture quality.

The second menu, labeled “PIP/PBP”, lets you enable the PIP/PBP functions and display different ways.

The third menu, labeled “OSD Setting”, contains the following settings for adjusting the display’s internal settings.

The fourth menu, labeled “System Setting”, lets you make adjustments to the system settings.

The fifth menu, labeled “Audio”, lets you control the display’s audio volume level. The Audio signal is passed through from the current active Video Input signal.

The sixth menu, labeled “Input Source”, lets you switch between the display’s different inputs.

The seventh menu, labeled “Information”, provides you system information of the display.